To access your reserved area you must fill out the registration form by following a simple wizard.
After clicking the button below, please enter your details and send the request.
ATTENTION: This operation applies only for the country from where you are registering. To access the Reserved Area from a different country you must do a new registration.
Range of barriers for very intensive use, for clear openings up to 6 m.
The wide range of accessories available makes them ideal in any context.
Control unit with programming display and built-in dual channel radio receiver.
They enable useful passages up to 6 m to be covered thanks to the new round boom
Also available in Moovi 30S rapid version with opening speed of 1.5s (plus slowing) and intensive use.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.
Barrier with 230 V motor power supply for clear opening up to 3 m and opening time 4 s. Impact resistance by means of Sensitive edge. Grey RAL 7015.
OpenBarrier with 230 V power supply for clear opening up to 3 m and opening time 4 s . Impact resistance by means of Sensitive edge. RAL colour as requested.
OpenBarrier with 230 V motor power supply for clear opening up to 3 m and opening time 4 s. Impact resistance by means of Encoder. Grey RAL 7015.
OpenBarrier with 230 V power supply for clear opening up to 3 m and opening time 4 s . Impact resistance by means of Encoder. RAL colour as requested.
OpenBarrier with 230 V motor power supply for clear opening up to 3 m and opening time 1.5+slow s. Impact resistance by means of Encoder. Grey RAL 7015.
OpenBarrier with 230 V power supply for clear opening up to 3 m and opening time 1.5+slow s . Impact resistance by means of Encoder. RAL colour as requested.
OpenBarrier with 230 V power supply for clear opening up to 3 m and opening time 1.5+slow s. Impact resistance by means of Encoder. Stainless steel structure.
OpenBarrier with 230 V motor power supply for clear opening up to 6 m and opening time 8 s. Impact resistance by means of Sensitive edge. Grey RAL 7015.
OpenBarrier with 230 V power supply for clear opening up to 6 m and opening time 8 s . Impact resistance by means of Sensitive edge. RAL colour as requested.
OpenBarrier with 230 V motor power supply for clear opening up to 6 m and opening time 8 s. Impact resistance by means of Encoder. Grey RAL 7015.
OpenBarrier with 230 V power supply for clear opening up to 6 m and opening time 8 s . Impact resistance by means of Encoder. RAL colour as requested.
Open
Barrier with 230 V power supply for clear opening up to 6 m and opening time 8 s. Impact resistance by means of Encoder. Stainless steel structure.
OpenBarrier with 230 V power supply for clear opening up to 3 m and opening time 8 s. Impact resistance by means of Encoder. Stainless steel structure.
OpenRecommended accessories.
CBO Cod. D730251Anchor base for MOOVI and GIOTTO series barriers.Anchor base for MOOVI and GIOTTO series barriers.
AQ3 Cod. N728033Complete 3 metre rectangular boom for GIOTTO and MOOVI.Complete 3 metre rectangular boom for GIOTTO and MOOVI.
AQ5 Cod. N728034Complete 5 metre rectangular boom for GIOTTO and MOOVI.Complete 5 metre rectangular boom for GIOTTO and MOOVI.
OMEGA AQ Cod. N999507Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO.Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO.
OMEGA AQ S/STEEL Cod. N999509Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX.Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX.
AT3 Cod. N728031Complete 3 metre round boom for MOOVI/GIOTTO.Complete 3 metre round boom for MOOVI/GIOTTO.
AT5 Cod. N728032Complete 5 metre round boom for MOOVI/GIOTTO.Complete 5 metre round boom for MOOVI/GIOTTO.
AT6 Cod. N728038Complete 6 metre round boom for MOOVI/GIOTTO.Complete 6 metre round boom for MOOVI/GIOTTO.
OMEGA AT Cod. N999513Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO.Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO.
FAF 2 Cod. P120023Rest fork for booms. For bolting to ground.Rest fork for booms. For bolting to ground.
ACTR Cod. N999608Pack of 12 additional reflective labels (1 pack already included with each boom).Pack of 12 additional reflective labels (1 pack already included with each boom).
ART 90 Q Cod. N728051 90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.90 ° articulated joint for Moovi and Giotto booms. Max 4m clear passage.
SB Cod. D573003Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm).
KIT LIGHT Cod. P120001 00001Lights on boom 3 - 4.5 m.Lights on boom 3 - 4.5 m.
KIT LIGHT1 Cod. P120001 00002Lights for booms over 4.5 m.Lights for booms over 4.5 m.
PCA N3 Cod. P120028 00001Top and bottom rubber cover profile for booms of 3 m max.Top and bottom rubber cover profile for booms of 3 m max.
PCA N4 Cod. P120028 00002Top and bottom rubber cover profile for booms of 4 m max.Top and bottom rubber cover profile for booms of 4 m max.
PCA N5 Cod. P120028 00003Top and bottom rubber cover profile for booms of 5 m max.Top and bottom rubber cover profile for booms of 5 m max.
PCA N6 Cod. P120028 00004Top and bottom rubber cover profile for booms of 6 m max.Top and bottom rubber cover profile for booms of 6 m max.
FAF 2R Cod. P125025
ZFAF2 Cod. P120026Additional anchor plates for cementing FAF2 forks to ground.Additional anchor plates for cementing FAF2 forks to ground.
GAM Cod. D940007Mobile rest leg for BGV barrier boom (not usable on BGV 30).Mobile rest leg for BGV barrier boom (not usable on BGV 30).
GA AQ AT Cod. D940008Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.
GAMA AQ AT Cod. D940009Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers).
-.
SPIRA 2X1 Cod. D110926 00001Magnetic loop 2 x 1 m.Magnetic loop 2 x 1 m.
