PILLAR B 275/800.6C L SD - RAL

Product code P970093 00103

230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. LED light cap and H adhesive strip: 100 mm, approved. The shaft remains in the raised position in case of a power failure. Painted steel version, RAL colour to order. Foundation box included.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

This solution, included in the range of Bft hydraulic bollards, allows quick maintenance without the use of a shaft lifting crane.

technical design
Control unit PERSEO CBE 230.P SD
Opening or closing time 6.5 s
Rod height 800 mm
Rod thickness 6 mm
Type of limit switch REED magnetic sensor
Slowdown no
Impact resistance 20000 J
Break-in proof 250000 J
Manual cycle Release key
Frequency of use 3000 Op/gg
Protection rating IP67
Environmental conditions -40 ÷ 60 °C
Interconnectivity no
Rod treatment Special RAL cataphoresis coating and paint
Power supply 230 V
Rod diameter 273 mm
TOTEM UNIT
P800116

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. Painted stainless steel version, RAL 7015.

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included....

TOTEM UNIT - RAL
P800116 00102

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL colour as requested.

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL...

TLIGHTS
P800117

Traffic lights and top covering for totem

TLIGHTS - RAL
P800117 00102

Traffic lights and upper cover for totem unit. RAL colour to order

TPF
P800040

Foundation and anchor plate for totem

TCAP
P800108

Top covering without lights for elements of Totem.

TCAP - RAL
P800108 00102

Top covering without lights for elements of Totem. RAL colour as requested.

ACOUSTIC DETECTOR
D113705

Adjustable acoustic detector for sirens

RME 2
P111001 00003

230 V dual channel metal object detector with installation base

SPIRA 2X1
D110926 00001

Magnetic loop 2 x 1 m

BOLLARD CABLE EXT25
P800114

Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT50
P800115

Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)

LOOP DETECTOR PRO
P111786

Metal object detector, 2 channels, 24 VDC/AC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

Metal object detector, 2 channels, 24 VDC/AC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity...

An unexpected error occurred: please reload the page or try again later.