MITTO

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices


433 MHz rolling code remotes for automatic gates, garage doors and other automated devices

Complete range of remote controls, 433MHz rolling code. Available with 2 or 4 channels.

Technologies
  • Rolling Code
  • ER - READY
  • For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

  • The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Products list
433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1 CLEAR ICE

Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1 SUNRISE

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: sunrise yellow

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1 VINEYARD

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: vineyard red

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R3

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R2 REPLAY

Copyable transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB02 R3

Transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB02 R2 REPLAY

Copyable transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB02 R1

Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R6 RAINBOW

Pack of four MITTO 4 transmitters in the four BFT colours: vineyard red sunrise yellow clear ice white deep sea blue

Accessories

Recommended accessories.

CLONIX 2E AC U-LINK 230
Cod. D113807 00002

433 MHz external receiver with 2 outputs with NO contact. Compatible with U-LINK protocol (with 3 connection slots). Power supply 230 V, 2048-position memory

433 MHz external receiver with 2 outputs with NO contact. Compatible with U-LINK protocol (with 3 connection slots). Power supply 230 V,...

CLONIX UNI AC U-LINK 230V
Cod. D113808 00003

433 MHz external receiver with 3 outputs: 2 with NO contact and one NO/NC configurable. Compatible with U-LINK protocol (with 3 connection slots). Power supply 230 V, 2048-position memory

433 MHz external receiver with 3 outputs: 2 with NO contact and one NO/NC configurable. Compatible with U-LINK protocol (with 3 connection...

CLONIX 4 RTE
Cod. D113718 00002

External 4-channel 433 MHz rolling code receiver. Power relay outputs (16 A 230 V). 230 V.

CLONIX 2E
Cod. D113674 00001

External dual channel 433 MHz rolling code receiver. 128-position memory. 24 V.

U-BASE
Cod. P111510

Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included

U-PROG
Cod. P111529

Programmer for radio control units and receivers with possibility of wired or BlueTooth connection

CLIP B 00 R04
Cod. N999522

Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack

CLIP1 B 00 R03
Cod. N999521

Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.