GIUNO ULTRA BT A50 DOUBLE KIT
Product code R935005 70006Complete kit for swing gates with hydraulic operator with 24 V for wings up to 5 m. 800 kg in weight and use very intensive. Manoeuvre time 20 s.
PLUS
Control unit with display: for easy scenario programming. U-Link: full interconnectivity with other devices via Bluetooth, RS-485, TCP/IP.
Selectable block system: the operators can be converted to reversible, with opening block, closing block or double block. All this by simply turning a key.
New magnetic limit switch: together with D-Track technology, offers extreme precision of maneuver and positioning. Double sensor system to define in detail end of the maneuver slowdowns. High reliability against dust, water and ice.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Control unit | THALIA P |
Board power supply | 230 V |
Motor voltage | 24 V |
Power input | 90 W |
Max. width of door/gate wing | 5 m |
Max. weight of door/gate wing | 800 kg |
Useful rod stroke | 392 mm |
Maximum angle | 110 ° |
Cycle time | 20 s |
Type of limit switch | Magnetic |
Slowdown | Yes |
Locking | Selectable in opening/closing |
Release | Triangle key |
Impact reaction | D-Track |
Frequency of use | very intensive |
Protection rating | IP55 |
Environmental conditions | -20 ÷ 60 °C |
U-Link | no |

GIUNO ULTRA BT A50
Hydraulic operator with 24 V for hinged wings up to 5 m. 800 kg in weight and use very intensive. Manoeuvre time 20 s.
Open
THALIA P
Control panel for one or two 24V electromechanical and hydraulic operators for swing gates with electric lock management, for highly complex systems.

MITTO B RCB02 R1
Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.
