GIUNO ULTRA BT A20 SINGLE KIT

Product code R935005 70008

Complete kit for swing gates with hydraulic operator with 24 V for wings up to 2 m. 300 kg in weight and use very intensive. Manoeuvre time 14 s.

PLUS
  • Control unit with display: for easy scenario programming. U-Link: full interconnectivity with other devices via Bluetooth, RS-485, TCP/IP.

  • Selectable block system: the operators can be converted to reversible, with opening block, closing block or double block. All this by simply turning a key.

  • New magnetic limit switch: together with D-Track technology, offers extreme precision of maneuver and positioning. Double sensor system to define in detail end of the maneuver slowdowns. High reliability against dust, water and ice.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.

The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design GIUNO ULTRA BT A
Control unit THALIA P
Board power supply 230 V
Motor voltage 24 V
Power input 90 W
Max. width of door/gate wing 2 m
Max. weight of door/gate wing 300 kg
Useful rod stroke 270 mm
Maximum angle 110 °
Cycle time 14 s
Type of limit switch Magnetic
Slowdown Yes
Locking Selectable in opening/closing
Release Triangle key
Impact reaction D-Track
Frequency of use very intensive
Protection rating IP55
Environmental conditions -20 ÷ 60 °C
U-Link no

GIUNO ULTRA BT A20

Hydraulic operator with 24 V for hinged wings up to 2 m. 300 kg in weight and use very intensive. Manoeuvre time 14 s.

Open

THALIA P

Control panel for one or two 24V electromechanical and hydraulic operators for swing gates with electric lock management, for highly complex systems.

MITTO B RCB02 R1

Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

THALIA Cod. D113745 00002Application: control panel with display for one or two 24V electromechanical operators for swing gates.
Board power supply: 230V...
Application: control panel with display for one or two 24V electromechanical operators for swing gates.
Board power supply: 230V single-phase.
Operators power supply: 24Vdc 180W max each operator.
Main features: new standard colour removable terminal blocks, simplified scenario-based programming with display and integrated dual-channel receiver, D-Track anti-crushing system, slowdown during opening and closing and electronic self-learning.
Main functions: automatic re-closing, fast closing, partial opening, deadman feature.
Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R.

ARB LUX Cod. N733426Adjustable front and rear bracket for LUX operator.Adjustable front and rear bracket for LUX operator.

ARB LUX G Cod. N733474Adjustable front and rear bracket for LUX G operator.Adjustable front and rear bracket for LUX G operator.

PL LX BT Cod. N999443Anchor plate for welding the mountings to masonry pillars for LUX BT, GIUNO BT A.Anchor plate for welding the mountings to masonry pillars for LUX BT, GIUNO BT A.

BBT BAT Cod. P125020Set of backup batteries for THALIA and THALIA P.Set of backup batteries for THALIA and THALIA P.

CABLE LX BT Cod. N9994171603 cable for LUX BT/GIUNO BT/IGEA - skein of 100 m.1603 cable for LUX BT/GIUNO BT/IGEA - skein of 100 m.

CLS Cod. D610180Triangular release key l=52 mm.Triangular release key l=52 mm.

View all the accessories
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.