DEIMOS ULTRA BT A

Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration


Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration

Range of operators for sliding gates weighing up to 600 Kg.
Maximum leaf speed up to 16 m/min.
Newly designed magnetic limit switch for quicker installation; precise and perfectly integrated with architecture of site.
Residential use.
Control unit designed for use with the Blue Entry system.

PLUS

Magnetic limit switches: this type of limit switch ensures safe and precise installations in any ambient condition

Control unit with programming display: the Merak control unit with programming display with pre-programmed scenarios helps the installer in the programming phase; the control unit is arranged in an oblique way, to facilitate reading and making the settings.

Front screws: this arrangement of the casing screws offers ease and convenience during installation and maintenance, even when there is limited space.

Release lever with personalised key: the release lever simplifies motor release and the personalized key ensures its uniqueness, for better safety

Technologies
  • For safe transmission.
    BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
    When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
    The algorithm generated then prevents the reproduction of the code.

  • The new coding system for direct cloning of remote controls.
    Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
    In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
    Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Products list
Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration

DEIMOS ULTRA BT A400 V

Operator 24 V for sliding gates up to 300 kg in weight. Leaf speed 16 m/min.

Open
Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration

DEIMOS ULTRA BT A600 V

Operator 24 V for sliding gates up to 360 kg in weight. Leaf speed 16 m/min.

Open
Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration

DEIMOS ULTRA BT KIT A400 FAST

Complete kit 24 V for sliding gates weighing up to 300 kg. Leaf speed 16 m/min.

Open
Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration

DEIMOS ULTRA BT KIT A600 FAST

Complete kit 24 V for sliding gates weighing up to 360 kg. Leaf speed 16 m/min.

Open
Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration

DEIMOS ULTRA BT A600 KIT WITH DESME

Complete kit 24 V for sliding gates weighing up to 360 kg. Leaf speed 16 m/min.

Open
Accessories

Recommended accessories.

  • CP Cod. D221073plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.
    plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.

  • CVZ-S Cod. N999320steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.
    steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.

  • SFD Cod. N999151Base plate for DEIMOS series (supplied with operator).Base plate for DEIMOS series (supplied with operator).

  • SL BAT2 Cod. P125035Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

  • B EBA RS 485 LINK Cod. P111468Expansion board for connection of central units with serial controls management.Expansion board for connection of central units with serial controls management.

  • CVZ Cod. D571053steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
    Max. load capacity 1000 kg.
    steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
    Max. load capacity 1000 kg.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.