ESPAS 30-U CC

catalog (PDF)

The Espas 30-U CC station combined with an electromechanical barrier is a device for managing an exit gate from a parking area and allows payment of the parking by credit card, scanning the entry ticket. The unit works in a wired network as a component between the other elements of the system. Equipped with ticket scanner and discount amount, proximity reader for operator and subscriber card, C/C terminal with CHIP and PIN and contactless. The display and voice messages guide improve the user experience.

Products list

  • Phase Out

The ESPAS 30-U CC-ITA CIT-IP station, combined with an electromechanical barrier, is a device used to control a car park exit and allows for payment to be made by credit card, by producing the parking ticket. The unit operates on a wired network as a component among the other system elements. It is fitted with a scanner to read the tickets, discounts, chip & PIN and contactless terminals and can manage RFID subscriptions and operator passes. The on-screen messages and the audio assistance improve the user experience. The peripheral is also fitted with an IP intercom.

Accessories

KIT STATIONS ANCHOR BASE
21261

Column anchor base for 20/30 entry/exit terminals

MAGNETIC LOOP 5MT
D110945

High sensivity pre-cabled magnetic loop (10m tail x 5m loop)

MAGNETIC LOOP 8MT
D141784

High sensivity pre-cabled magnetic loop (10m tail x 8m loop)

HEATER UNIT
D121711

Heater unit 60W for internal station/POF installation on DIN bar

TRAFFIC LIGHT 100MM
D121458

Traffic light, 2 lights (green/red), diam, 100mm

TRAFFIC LIGHT 200MM
130186

Traffic light, 2 lights (green/red), diam, 200mm

TRUCK HEIGHT PEDESTAL 800MM
D413445

800mm height pedestal, with door, for entry/exit column

BUS HEIGHT PEDESTAL 600MM
D413530

600mm height pedestal, with door, for entry/exit column

LOOP DETECTOR LITE
D113999

2 channel loop detector, 24VDC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for sensitivity increase

2 channel loop detector, 24VDC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for...

LOOP DETECTOR PRO
D113948

2 channel loop detector, 24VDC/AC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for sensitivity increase. Direction detection.

2 channel loop detector, 24VDC/AC, up to 4 frequencies per channel for close loop installations, adjustable sensitivity, boost function for...

KIT INTERLOCK FOR PARKING
P800137

Kit for manage interlock function (station between two barriers), useful to prevent queues on the gate or for particularly security requirements. It's usable when a third loop management is required (e.g. motorbike). Includes a loop detector for the second barrier safety loop and a kit of terminals in order to connect the commands of the second barrier.

Kit for manage interlock function (station between two barriers), useful to prevent queues on the gate or for particularly security...

PRESENCE AND SAFETY DETECTOR - LASER LOOPS
394080

Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection range: 9.9m x 9.9m.10-35VDC power supply.

Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection...

LASER SAFETY SENSOR
394073

Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes two relay outputs. Maximum detection range: 5m x 5m.10-35VDC power supply.

Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes...

PALO ø60 H3600
394160

Galvanized steel pole support for panels and traffic lights. Diam. 60mm - h 3600mm

LASER DETECTOR REMOTE CONTROL
394075

Remote control for settings Safety laser detector and Presence and Safety laser detector.

485-TCP/IP CONVERTER KIT
P800132

The device allows the insertion within a wired TCP/IP network of devices using an RS-485 serial interface. The solution is used in all those realities where it is necessary to transmit serial data through, for example, a local network already present.

The device allows the insertion within a wired TCP/IP network of devices using an RS-485 serial interface. The solution is used in all those...

An unexpected error occurred: please reload the page or try again later.