Motors and kit for the automation of roller shutters

REEL EASY RUA A10 230V R45

Product code P910047 00001
  • DIMENSIONAL DIAGRAM
technical design REEL EASY RUA

Radio operator for roller shutters. Max shutter weight 18 kg. Max torque 10 nm and power input 125 W. Shaft rotation speed 16 Rpm.

PLUS
  • The KIT version comes complete with all accessories for proper installation as well as operators already arranged in the special telescopic roller, able to adapt perfectly the size of the frame with a single action

  • New range complete with 1 to 5-channel PAD radio controls, features a modern design to suit any home context

  • New Shedir compact wire centralisation board: easily installed even in the boxes of roller shutters thanks to its small size, it can control up to two motors or motor units in single or centralised mode.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical Data
Control unit Built-In
Motor power supply 230 V
Power input 125 W
Outer diameter 60 mm
N° limit switch revolutions 28
Type of end switch Electronic
Locking Mechanical
Frequency of use Residential
Protection rating IP44
Environmental conditions -10 ÷ 40 °C
U-Link no
Accessories

Recommended accessories.

  • SHEDIR B CBC 02 L01 Cod. P111515Control unit for wired centralisation. For 2 operators (or 2 groups of operators).
    Application: wire centralisation board for 1 or 2 tubular...
    Control unit for wired centralisation. For 2 operators (or 2 groups of operators).
    Application: wire centralisation board for 1 or 2 tubular motors.
    Board power supply: 230V single-phase.
    Operator power supply: 230V 600W max. each operator.
    Main characteristics: simplified and compact wire centralisation system.
    Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down.

  • ELBA Cod. D113716 00002Control panel, max 230V, for roller shutters or roll-up doors.
    Application: control panel for REEL type operator for roller shutters.
    Board...
    Control panel, max 230V, for roller shutters or roll-up doors.
    Application: control panel for REEL type operator for roller shutters.
    Board power supply: 230V single-phase.
    Operator power supply: 230V monophase.
    Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver.
    Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management.
    Compatibility: CAPRI, CAPRI RIC, CAPRI TCA.

  • SCS 1 Cod. P111376Serial board for connection to zone and opposing leaves for control units with display While stocks last.Serial board for connection to zone and opposing leaves for control units with display While stocks last.

  • CREP Cod. P111183Twilight sensor.Twilight sensor.

  • ANEM Cod. P111182Anemometric ​​sensor with encoder for wind.Anemometric ​​sensor with encoder for wind.

  • AD 5027 Cod. N999323Drive wheel and limit switch adapter for RUL60.Drive wheel and limit switch adapter for RUL60.

  • AD5028 Cod. N999327Octagonal adapter Ø70 mm zamak.Octagonal adapter Ø70 mm zamak.

  • AD5029 Cod. N999348Round adapter Ø63x1.5 mm.Round adapter Ø63x1.5 mm.

  • AD5030 Cod. N999349Deprat LP62 adapter.Deprat LP62 adapter.

  • AD5031 Cod. N999350Deprat LP89 adapter.Deprat LP89 adapter.

  • AD5032 Cod. N999351ZF 64 adapter.ZF 64 adapter.

  • AD5034 Cod. N999395ZF 54 adapter.ZF 54 adapter.

  • AD5035 Cod. N999396Ogive adapter Ø78 mm.Ogive adapter Ø78 mm.

  • AD5036 Cod. N999397Octagonal adapter 60 PL.Octagonal adapter 60 PL.

  • AD5037 Cod. N999546Plastic ogive adapter Ø70 mm.Plastic ogive adapter Ø70 mm.

  • AD5038 Cod. N999547Metallic ogive adapter Ø70 mm.Metallic ogive adapter Ø70 mm.

  • SM504 Cod. P130015Support with bearing for octagonal roller - screw type.Support with bearing for octagonal roller - screw type.

  • SM505 Cod. P130014Support for octagonal roller - cementing type.Support for octagonal roller - cementing type.

  • SM5013 Cod. N999324Wall-mounted orientable support for operators with manual release.Wall-mounted orientable support for operators with manual release.

  • SM5014 Cod. N999325Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

  • SM5015 Cod. N999326Wall-mounted two-position orientable support for operators with manual release.Wall-mounted two-position orientable support for operators with manual release.

  • CAL 60/30 Cod. P130004Octagonal cover for RUL 60.Octagonal cover for RUL 60.

  • CAL 60/100 Cod. P130002Adjustable telescopic octagonal cover for RUL 60.Adjustable telescopic octagonal cover for RUL 60.

  • RUL 60/1,5 Cod. P130010Octagonal shutter winding roller Ø60 mm x 1.5 m.Octagonal shutter winding roller Ø60 mm x 1.5 m.

  • RUL 60/3 Cod. P130012Octagonal shutter winding roller Ø60 mm x 3 m.Octagonal shutter winding roller Ø60 mm x 3 m.

  • RUL 60/6 Cod. P130008Octagonal shutter winding roller Ø60 mm x 6 m.Octagonal shutter winding roller Ø60 mm x 6 m.

  • BLOCCANTI 40 Cod. P130001Anti-break-in block for shutters with slats of height 40 mm.Anti-break-in block for shutters with slats of height 40 mm.

  • BLOCCANTI 50 Cod. P130013Anti-break-in block for shutters with slats of height 50 mm.Anti-break-in block for shutters with slats of height 50 mm.

  • MM8 Cod. N999328Manual operation eye-ring.Manual operation eye-ring.

  • MM9 Cod. N99932945 ° universal joint for manual operation.45 ° universal joint for manual operation.

  • MM10 Cod. N99933090 ° universal joint for manual operation.90 ° universal joint for manual operation.

  • MM11 Cod. N9993311.5 m articulated boom with hook for manual operation.1.5 m articulated boom with hook for manual operation.

  • MM12 Cod. N9993321.5 m rigid boom with hook for manual operation.1.5 m rigid boom with hook for manual operation.

  • ER 1 Cod. P130025External receiver for REEL RUA series operators. Compatible with PAD series transmitters.External receiver for REEL RUA series operators. Compatible with PAD series transmitters.

  • Timer Cod. P130024Weekly programmer for REEL RADIO or external ER-1 receiver.Weekly programmer for REEL RADIO or external ER-1 receiver.

  • Pad Rcd 01 F Cod. D111911Wall-mounted remote control 1 channel for radio tubes.Wall-mounted remote control 1 channel for radio tubes.

  • Pad Rcd 01 R Cod. D1119091-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.1-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.

  • Pad Rcd 05 R Cod. D1119105-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.5-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver.

  • MIME AC Cod. D113824433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable,...
    433 MHz two-channel indoor receiver 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable, timed, motor control.

  • MITTO B RCB04 R1 CLEAR ICE Cod. D111947Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: clear ice white.Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: clear ice white.

  • MITTO B RCB04 R1 Cod. D111906Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

  • MITTO B RCB02 R1 Cod. D111904Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

  • RB Cod. P1210164-channel wall-mounted radio control with rolling code.4-channel wall-mounted radio control with rolling code.

  • MIME PAD Cod. P1210284-channel wall-mounted radio control with rolling code.4-channel wall-mounted radio control with rolling code.

  • MIME TX Cod. D113831two-channel miniaturized 433 Mhz transmitter.two-channel miniaturized 433 Mhz transmitter.

  • ELBA BU Cod. D113717 00002Control panel, max 230V, for roller shutters or roll-up doors.
    Application: control panel for one roll-up door operator.
    Board power supply:...
    Control panel, max 230V, for roller shutters or roll-up doors.
    Application: control panel for one roll-up door operator.
    Board power supply: 230V single-phase.
    Operator power supply: 230V monophase.
    Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver, control button on case.
    Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management.
    Compatibility: CAPRI, CAPRI RIC, CAPRI TCA.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.