Control panels

Bft control panels have a unique configuration which simplifies installation. The control panels are able to operate 24V or 230V automation systems and have remote communication capability with the…

-

Built-in control unit for the Maxima range of barriers

Control panel with trimmer and dip switch for one operator, 230V - 70W

Control unit for pedestrian doors.

Part of the range:

Control panel with display for one or two 24V electromechanical operators for 230V/200W overhead garage doors. The dual-channel radio receiver is incorporated. It has a crush-proof system based on D-Track technology, controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, pulse blocking, pulse locking and locked shut maintenance. Supports the U-LINK and EELINK protocols.

Control panel with dip switches and potentiometers for one or two 230V/500W operators used on sliding and swing gates, shutters and overhead doors with the management of up to two sensitive edges (one of which type 8K2). The dual-channel radio receiver is incorporated. With the potentiometers, we can manage not only the automatic closing time but also the strength of the gates and slowing down time. Functions include the pedestrian opening (only remote controlled), fast closing and the pulse blocking function. The detection of faults is done via LED.

Control panel with display for 1 or 2 operators built in to Virgo.

Part of the range:

Control panel with dip switches and potentiometers for one or two 24V electromechanical operators for 230V/80W swing gates. The dual-channel radio receiver is incorporated. The torque is electronically adjusted with an obstacle detection system. The strength of the gates and slowing down space can be adjusted with the potentiometers. Key functions include automatic closing, fast closing, pulse locking when opening and pressure surge when opening. It supports the EELINK protocol.

230V/1200W power supply board that allows for up to 2 engines for shutters or engine units to be controlled using a three-position diverter.

Part of the range:

Control panel wit display for a 230V/750W operator used on sliding gates, industrial sectional doors and automatic barriers, with obstacle detection function achievable with sensitive edge or BFT encoder. The command inputs can be configured, the radio receiver has rolling code technology incorporated into it and the terminal boards are coloured and can be removed to make it easier to perform the wiring.

Control panel with display for one or two 230V used on electromechanical or hydraulic parking bollards. It can deal with up to four bollards simultaneously (or two in the case of the Xpass 1200 models) and has configurable outputs and a connector for a 433 MHz radio receiver with optional 2048 code memory.

Control panel, max 230V, for roller shutters or roll-up doors

Part of the range:

Universal potentiometer control panel for one 230V single-phase operator

Part of the range:

Universal control board with display for one or two swing or sliding door operators, 230V - 650+650W. Main features: removable terminal blocks, programming and diagnostics with display, built-in four-channel receiver, electro lock, electronic torque limiter, electronic deceleration at opening and closing, a separate limit switch inputs for each motor, traffic light management, preheating hydraulic operators , weekly timer, possibility to delete a specific remote control, customization of the 4 radio channels, personalization of the duration of the delayed output, adjustable sensitivity to the obstacle.

Control board for 230V and 1200W operator for rolling shutters with maximum manoeuvrable power supply. Main characteristics: Dedicated output for the blinker, availability of open, start, photocell and safety edge (tested) inputs, antenna and receiver integrated Logic and regulations: adjustable working time, option of selecting the kind of safety edge (N.C. contact/8K2 resistance) selectable, wireless memorizing of transmitters CLONE and REPLAY, operation in line with 2 or 4 step logic, exclusion of photocell active when opening, hold to run mode available.

Control panel with dip switches and potentiometers for one or two 230V/400+400W operators used on swing gates and industrial folding doors with management of sensitive edges and security entry verification option. It can control the gate's slowing down both when opening and closing. It can also control the connection with an EBP electric lock or with an ECB (with additional ME card). The radio receiver has rolling code technology incorporated into it. The terminal boards are coloured and can be removed to make it easier to perform the wiring.

Part of the range:

Control panel with display for one or two 24V electromechanical operators used on 230V/500W swing gates (Power version). The dual-channel radio receiver is incorporated. It has a crush-proof system based on D-Track technology, controls the slowing down when opening and closing and has an electronic self-learning function. The main functions include automatic closing, fast closing, partial opening and hold-to-run operation.

Control panel with dip switches and potentiometers for one or two 230V300W operators used on swing gates, with management of sensitive edges and security entry verification option. It can also control the connection with an EBP electric lock or with an ECB (with additional ME card). The radio receiver has rolling code technology incorporated into it. The terminal boards are coloured and can be removed to make it easier to perform the wiring.

Control unit for one 230/400V operator for sliding gates

Select up to 3 products
    No product selected

    Control panels

    Bft control panels have a unique configuration which simplifies installation. The control panels are able to operate 24V or 230V automation systems and have remote communication capability with the U-Link platform.

    An unexpected error occurred: please reload the page or try again later.