VIRGO SMART BT A 20 SLAVE
Product code P930130 00002Irreversible electromechanical operator 24 V for swing gates weighing up to 200 kg and 2 m long.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partnerA precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.
The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Motor voltage | 24 V |
Power consumption | 110 W |
Max. width of door/gate wing | 2 m |
Max. weight of door/gate wing | 200 kg |
Maximum angle | 120 ° |
Cycle time | 14 s |
Type of limit switch | Electromechanical |
Slowdown | Yes |
Locking | Mechanical |
Release | Personal key |
Impact reaction | Electronic torque limiter |
Frequency of use | Semi intensive |
Protection rating | IP44 |
Environmental conditions | -20 ÷ 55 °C |
Interconnectivity | no |
Control unit | |
Board power supply | --- |

LAS
Cod. N728052
VIRGO BT A slide lever

TFS
Cod. P111775
Virgo Smart BT A 3-wire board KIT (1 Kit per engine)

AAP
Cod. N999735
VIRGO SMART BT A misaligned doors accessory

AMV
Cod. N998600
Virgo Smart BT A 20 mechanical stop KIT

RCA
Cod. N733421
Lever release with steel cable, length 3.5 m. Compatible with BOX.

RCAL
Cod. N733422
Lever release with steel cable, length 7 m. Compatible with BOX.

BOX
Cod. N574039
Wall cabinet for release with steel cable and electric control; cable not included

VIRGO BAT
Cod. P125008
Set of backup batteries for VIRGO

RADIUS LED BT A R1
Cod. D114093 00003
Flashing light with incorporated antenna for motors with 24 V power supply.

RADIUS LED BT A R1 W
Cod. D114168 00003
Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

RADIUS LED BT A R0
Cod. D114094 00003
Flashing light without incorporated antenna for motors with 24 V power supply.

COMPACTA A20-180
Cod. P111782
Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

