ALCOR AC A 120V

Product code D114092 00001

Control panel with dip switches and potentiometers for one or two 120V/300W operators for swing gates Compatibility: ALCOR SD, ALCOR N Application: control panel for one or two swing gate operators Panel power supply: Operator power supply: 230 V single-phase, max. 300W per operator Main features: removable terminal blocks, settings controlled by potentiometers, fault signalling LEDs and incorporated dual channel receiver Main functions: stays locked when closed, 3/4 step logic, partial opening, separate opening/closing

technical design
Interconnectivity no
Maximum output 750 W
Board power supply 110-120 V
Max. n. transmitters 63
Programming DIP+TRIMMER
Power supply accessories 24V - 0,2A
Light sensor 1
Safety edge 1
Resistive edge 1
Tested photocell 1
Tested safety edge 1
Stop 1
Start 1
Open 1
Blinker 0
Configurable AUX 1 0
Configurable AUX 1 0
Configurable AUX 2 0
Configurable AUX 2 0
Configurable AUX 3 0
Configurable AUX 3 0
Solenoid Lock 0
Solenoid Lock 0
Alarm 0
Alarm 0
Courtesy Light 0
Courtesy Light 0
Gate open warning light 0
Gate open warning light 0
Courtesy light 0
Courtesy light 0
Electric release lock 0
Electric release lock 0
Electric magnetic lock 0
Electric magnetic lock 0
Maintenance 0
Maintenance 0
Flashing + Maintenance 0
Flashing + Maintenance 0
Tamper-proof 0
Tamper-proof 0
Zone light 0
Zone light 0
Stairs light 0
Stairs light 0
Gate open alarm 0
Gate open alarm 0
Gate status 0
Gate status 0
Bistable radio channel 0
Bistable radio channel 0
Encoder response 0
Encoder response 0
PDM contact activated 0
PDM contact activated 0
Bar closed 0
Bar closed 0
Bar open 0
Bar open 0
Stop contact activated 0
Stop contact activated 0
Pre-flashing 0
Pre-flashing 0
Bar lock 0
Bar lock 0
Open contact activated 0
Open contact activated 0
Close contact activated 0
Close contact activated 0
Start contact activated 0
Start contact activated 0
FRAC contact 0
FRAC contact 0
UPS contact 0
UPS contact 0
Time delay radio channel 0
Time delay radio channel 0
Contact according to radio channel 0
Contact according to radio channel 0
bollard raised 0
bollard raised 0
Black out 0
Black out 0
Buzzer 0
Buzzer 0
ECD pressure switch not functioning 0
ECD pressure switch not functioning 0
FCC sensor not functioning 0
FCC sensor not functioning 0
Alarm 0
Alarm 0
Photocell response 0
Photocell response 0
bollard lowered 0
bollard lowered 0
Obstacle detection (hydraulic only) 0
Obstacle detection (hydraulic only) 0

An unexpected error occurred: please reload the page or try again later.