Hydraulic anti-terrorism bollard K4 230 V. Shaft height 800 mm, diameter 273 mm, with LED lights cap. In the event of a power failure, the shaft keeps the access closed. Painted steel shaft, RAL 7015. Foundation box included.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
This solution, included in the range of Bft hydraulic bollards, allows quick maintenance without the use of a shaft lifting crane.
Anti-terrorism certification The X-Pass B 330/1200 bollard has obtained Iwa certification, classifying it as an anti-terrorism device. In the crash test, one of these bollards stopped a 7,200 kg heavy vehicle travelling at a speed of 80 kph. A perfect solution to protect sensitive buildings, such as barracks, banks and embassies, from intrusion by potentially dangerous vehicles. The test was carried out by the English company Mira, specialised in innovations in the world of engineering and product testing.
|Control unit||PERSEO CBE|
|Rod height||800 mm|
|Rod thickness||10 mm|
|Type of limit switch||REED magnetic sensor|
|Raise time||max. 7 seconds|
|Lower time||4 s|
|Break-in proof||800000 J|
|Antiterrorism: reference standard||PAS 68:2010 7500/50/N2|
|Manual cycle||reversible by means of mechanical key with no power|
|Frequency of use||2000 Op/gg|
|Environmental conditions||-40 ÷ 60 °C|
|Power supply||230 V|
|Rod diameter||273 mm|
Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included....
TOTEM UNIT - RAL
Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL...
TLIGHTS - RAL
TCAP - RAL
MANUAL PUMP 2LT
LOOP DETECTOR PRO
Metal object detector, 2 channels, 24 VDC/AC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity...