WIND RMB 170B 200-230 EF
Product code P910044 00002Operator for shutters with spring holder pulley diam. 60 mm. Max. torque 170 Nm and absorbed power 600 W. Release with steel cable and knob for electric brake.
Main features
Simple and intuitive adjustment of limit switches
Adapters for 42 or 48 (RMB) or 76mm (RMC) shafts included in the pack
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
Control unit | ELBA/ELBA BU |
Power supply | 230 V |
Power consumption | 600 W |
Shaft diameter | 60 mm |
Spring holder diameter | 200 mm |
Maximum torque | 170 Nm |
Rotation speed | 10 Rpm |
Type of end switch | |
Locking | Electric brake |
Impact reaction | no |
Protection rating | IP20 |
Environmental conditions | -10 ÷ 50 °C |
Interconnectivity | no |

SHEDIR B CBC 02 L01
Cod. P111515
Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular motors Card power supply: 230 V single-phase Operator power supply: 230V 600W max. each operator Main characteristics: simplified and compact wire centralisation system Functions: control of 1 or 2 motors (or motor units) in single or simultaneous mode, general up/down, motor 1 or unit 1 up/down, motor 2 or unit 2 up/down
Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Application: wire centralisation board for 1 or 2 tubular...

ELBA
Cod. D113716 00002
Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for REEL type operator for roller shutters Card power supply: 230 V single-phase Operator power supply: 230V monophase Main features: Extremely compact size for installation in shutter case, programming with potentiometers and dip switches, built-in receiver Main functions: separate open/close, photocells input, possibility of centralised controls, anemometer and twilight sensor management Compatibility: CAPRI, CAPRI RIC, CAPRI TCA
Control panel, max 230V, for roller shutters or roll-up doors Application: control panel for REEL type operator for roller shutters Card...

COMPACTA A20-180
Cod. P111782
Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

BOX
Cod. N574039
Wall cabinet for release with steel cable and electric control; cable not included

X EF1
Cod. N999510
Electric brake for Wind Rmc and Rmb 230V