MITTO
433 MHz rolling code remotes for automatic gates, garage doors and other automated devices

Complete range of remote controls, 433MHz rolling code. Available with 2 or 4 channels.
Technologies
For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
Products list

MITTO B RCB04 R1 CLEAR ICE
Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo.

MITTO B RCB04 CLEAR ICE CUSTOMIZED
Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour clear ice white. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

MITTO B RCB04 R3 CUSTOMIZED
Transmitters with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Pack of 100 items, numbered for block memory. Buttons panel can be customised with own design/logo.

MITTO B RCB04 R1 SUNRISE
Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: sunrise yellow

MITTO B RCB04 SUNRISE CUSTOMIZED
Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour sunrise yellow. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

MITTO B RCB04 R1 VINEYARD
Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: vineyard red

MITTO B RCB04 VINEYARD CUSTOMIZED
Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Colour vineyard red. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

MITTO B RCB04 R3
Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

MITTO B RCB02 R3 CUSTOMIZED
Transmitters with 2 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Pack of 100 items, numbered for block memory. Buttons panel can be customised with own design/logo.

MITTO B RCB04 R2 REPLAY
Copyable transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

MITTO B RCB04 4CH REPLAY CUSTOMIZED
Pairable transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

MITTO B RCB04 R1
Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

MITTO B RCB04 4CH CUSTOMIZED
Transmitter with 4 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

MITTO B RCB02 R3
Transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

MITTO B RCB02 R2 REPLAY
Copyable transmitter 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.

MITTO B RCB02 2CH REPLAY CUSTOMIZED
Pairable transmitter with 2 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

MITTO B RCB02 R1
Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

MITTO B RCB02 2CH CUSTOMIZED
Transmitter with 2 channels. Range 50/100 m. 12 V power supply with 1 23 A battery. Buttons panel can be customised with own design/logo. Minimum quantity 100 items.

MITTO B RCB04 R6 RAINBOW
Pack of four MITTO 4 transmitters in the four BFT colours: vineyard red sunrise yellow clear ice white deep sea blue