Kit for non-reversible sectional garage doors with tractive force 850 N and intensive usage. Door surface area 13 m². Opening speed 210 mm/sec. Chain rail in three pieces, length 2900 mm, effective travel 2400 mm
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.
|Door surface area||13 m²|
|Release||Steel cord or cable|
|Control unit||VENERE BT A DIS|
|Max opening speed (chain rail)||210 mm/sec|
|Nominal voltage||24 V|
|Max opening speed (belt rail)||240 mm/sec|
|Power consumption||200 W|
|Type of limit switch||Encoder + mechanical stop for opening|
|Environmental conditions||-20 ÷ 60 °C|
|Tractive force and thrust||850 N|
|Number of daily movements at 60°||50|
BIN 650-850 CATENA 2900
BIN 650-850 CATENA 3500
BIN 650-850 CATENA 2X1450
BIN CHAIN 2X1750
Chain rail divided into two halves for Botticelli, length 3500, travel 3000 millimetres Chain rail divided into two halves for Botticelli,...
BIN 650-850 CATENA 2X1750
BIN 650-850 CINGHIA 2900
BIN 650-850 CINGHIA 3500
BIN 650-850 CINGHIA 2X1450
BIN 650-850 CINGHIA 2X1750
BIN 1250-2900 CATENA
BIN 1250-3500 CATENA
BIN 1250 2x1450 CATENA
BIN 1250 2x1750 CATENA
Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U...
RADIUS LED BT A R1
RADIUS LED BT A R0
RADIUS LED BT A R1 W
BT BAT 3
Built-in penlight battery for Botticelli BT A for emergency operation. Enables 2 movements to be made. Max. duration 12 hours in standby...