>

Accessories

Attention to detail is what makes a whole complete and fully functional.


CP Plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots Max. load capacity 600 Kg. Plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots Max. load capacity 600 Kg.

CVZ Steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports (supplied) Max. load capacity 2000 Kg. Steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports (supplied) Max. load capacity 2000 Kg.

CVZ-S Steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports (supplied) Max. load capacity 800 kg. Steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports (supplied) Max. load capacity 800 kg.

CFZ Galvanized steel rack for welding, 22x22 mm, 4-module, cross-section from 2 m Max. load capacity 1000 kg. Galvanized steel rack for welding, 22x22 mm, 4-module, cross-section from 2 m Max. load capacity 1000 kg.

CFZ6 Galvanized steel rack for welding, 30x30' mm, 6-module, cross-section from 2 m CFZ 6 rack Max. load capacity 4000 kg. Galvanized steel rack for welding, 30x30' mm, 6-module, cross-section from 2 m CFZ 6 rack Max. load capacity 4000 kg.

PEGASO CABLE MONO Pre-wired power supply cable for PEGASO single phase operators. Length 1 m Pre-wired power supply cable for PEGASO single phase operators. Length 1 m

PEGASO CABLE TRI Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m Pre-wired power supply cable for PEGASO three-phase operators. Length 1 m

PEGASO UP CONTROL 5 Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 5 m

PEGASO UP CONTROL 10 Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m Cable with pre-wired OPEN - STOP - CLOSE keypad for PEGASO UP operators. For adjusting motor limit switches from floor level. Length 10 m

Pegaso Cable Enc 5 Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5m Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 5m

Pegaso Cable Enc 10 Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10m Pre-wired connection cable between operator and external control unit for the management of encoder. Lenght 10m

Pegaso Cable Auto 5N Pre-wired connection cable between PEG INT and external control unit electric power supply Length 5 m Pre-wired connection cable between PEG INT and external control unit electric power supply Length 5 m

Pegaso Cable Auto 10N Pre-wired connection cable between PEG INT and external control unit electric power supply Length 10 m Pre-wired connection cable between PEG INT and external control unit electric power supply Length 10 m

CABLE LX BT Cable 1603 for PHOBOS/IGEA - 100m coil Cable 1603 for PHOBOS/IGEA - 100m coil

CABLE N Control unit connecting cable for PHOBOS N/PHOBOS NL. Coil of 100 m Control unit connecting cable for PHOBOS N/PHOBOS NL. Coil of 100 m

CABLE N BT Control unit connecting cable for PHOBOS N BT/PHOBOS NL BT. Coil of 100 m Control unit connecting cable for PHOBOS N BT/PHOBOS NL BT. Coil of 100 m

ECOSOL CABLE 20 m extension for ECOSOL CHARGER 20 m extension for ECOSOL CHARGER

ALCOR N Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates Control panel with dip switches and potentiometers for one or two 230V/300W operators for swing gates

THALIA Control panel with display for one or two 24V electromechanical operators for swing gates Control panel with display for one or two 24V electromechanical operators for swing gates

VEGA QUADRO QSG Vega control board in CPEL panel Vega control board in CPEL panel

ALTAIR P Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors

ALPHA SD Universal control panel with potentiometers for one 230V/500W single-phase operator Universal control panel with potentiometers for one 230V/500W single-phase operator

ELBA Control panel, max 230V, for roller shutters or roll-up doors Control panel, max 230V, for roller shutters or roll-up doors

THALIA P Control panel for one or two 24V electromechanical and hydraulic operators for swing gates with electric lock management, for highly complex...
Control panel for one or two 24V electromechanical and hydraulic operators for swing gates with electric lock management, for highly complex systems

LEO B CBB L01 Control board for PEGASO CJA single phase operators Control board for PEGASO CJA single phase operators

Leo B Cbb W01 Application: control unit for 1 Pegaso B Cja series three-phase operator Board power supply: 400V three-phase Operator power supply: 400V...
Application: control unit for 1 Pegaso B Cja series three-phase operator Board power supply: 400V three-phase Operator power supply: 400V three-phase

Shedir B Cbc 02 L01 Control unit for wired centralisation. For 2 operators (or 2 groups of operators) Control unit for wired centralisation. For 2 operators (or 2 groups of operators)

VENERE D ARGO Control panel for one 24V operator for garage doors Control panel for one 24V operator for garage doors

ZARA BT L2 Control panel with dip switches and potentiometers for one or two 24V operators for swing gates Control panel with dip switches and potentiometers for one or two 24V operators for swing gates

PERSEO CBE 230.P SD Control unit with U-Link, receiver and incorporated heating circuit (to -40°C) for electro-mechanical and hydraulic bollards. Can manage up...
Control unit with U-Link, receiver and incorporated heating circuit (to -40°C) for electro-mechanical and hydraulic bollards. Can manage up to 4 bollards at the same time (or up to 2 Xpass 1200)

RIGEL 6 220-230V 50/60HZ Universal control panel with display for one or two 230V - 650+650W operators Universal control panel with display for one or two 230V - 650+650W operators

HYDRA N CPEL HYDRA N control board in CPEL panel HYDRA N control board in CPEL panel

ARB ORO Adjustable front and rear brackets for ORO operator Adjustable front and rear brackets for ORO operator

PLE Anchor plate for welding the mountings to masonry pillars for LUX and PHOBOS N operators Anchor plate for welding the mountings to masonry pillars for LUX and PHOBOS N operators

PL LX BT Anchor plate for welding the mountings to masonry pillars for LUX BT Anchor plate for welding the mountings to masonry pillars for LUX BT

ARB LUX G Adjustable front and rear bracket for LUX G operator Adjustable front and rear bracket for LUX G operator

ARB LUX Adjustable front and rear bracket for LUX operator Adjustable front and rear bracket for LUX operator

ARB PHOBOS N Front and rear adjustable bracket for PHOBOS N, PHOBOS N BT operator Front and rear adjustable bracket for PHOBOS N, PHOBOS N BT operator

ARB PHOBOS N L Front and rear adjustable bracket for PHOBOS NL, PHOBOS NL BT operator Front and rear adjustable bracket for PHOBOS NL, PHOBOS NL BT operator

APT Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling

ECOSOL POST BR Set of stainless steel screws and brackets for installing the ECOSOL PANEL on a post of diameter 48-100mm Set of stainless steel screws and brackets for installing the ECOSOL PANEL on a post of diameter 48-100mm

ECOSOL SECURITY Anti-tamper stainless steel screws and fasteners for ECOSOL PANEL and ECOSOL POST BR Anti-tamper stainless steel screws and fasteners for ECOSOL PANEL and ECOSOL POST BR

TPF Foundation and anchor plate for totem Foundation and anchor plate for totem

SBV Anodised aluminium supporting crosspiece for VISTA SL Anodised aluminium supporting crosspiece for VISTA SL

PPR Door guide slide for automatic doors with aluminium frame Door guide slide for automatic doors with aluminium frame

PGI Bottom door guide for automatic doors with aluminium frame Bottom door guide for automatic doors with aluminium frame

PEGASO ADA PEGASO ADA adapter for installation on doors with 1"1/4 shaft PEGASO ADA adapter for installation on doors with 1"1/4 shaft

PEG CCP Extension for PEGASO C operators release chain. Length 4 m Extension for PEGASO C operators release chain. Length 4 m

SFZ Additional fixing bracket kit. To be used on chain drive installations. Additional fixing bracket kit. To be used on chain drive installations.

LRV Short arm for IGEA, IGEA BT - LRV Short arm for IGEA, IGEA BT - LRV

SFD Base plate for DEIMOS series (supplied with operator) Base plate for DEIMOS series (supplied with operator)

SFI Base plate for ARES and ICARO (supplied with operator) Base plate for ARES and ICARO (supplied with operator)

SFSP Adjustable anchor base for SP3500, supplied separately Adjustable anchor base for SP3500, supplied separately

SP3500 SAFETY Safety microswitch for SP3500 Safety microswitch for SP3500

SLV SBV C1 Brackets for ceiling mounting of the SBV C aluminium supporting crosspiece Brackets for ceiling mounting of the SBV C aluminium supporting crosspiece

SLV SBV C2 Brackets for side mounting of the SBV C aluminium supporting crosspiece Brackets for side mounting of the SBV C aluminium supporting crosspiece

SBV C Anodized aluminum support crossbeam for VISTA SL C. Price per linear meter Anodized aluminum support crossbeam for VISTA SL C. Price per linear meter

SAS1 KIT B GDA 260 B01 Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm Brackets for ceiling mounting TIZIANO B GDA up to max 30 cm

SAS2 KIT B GDA 260 B01 Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm Brackets for ceiling mounting TIZIANO B GDA up to max 50 cm

SBV TL Vista TL support beam, length 6.82m Vista TL support beam, length 6.82m

NAT Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

CPS DX CPS DX foundation box designed for fitting the SUB right-hand operator CPS DX foundation box designed for fitting the SUB right-hand operator

FCS DX Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

CPS G Foundation box designed for fitting the SUB G operator Foundation box designed for fitting the SUB G operator

CPS SX CPS SX foundation box designed for fitting the SUB left-hand operator CPS SX foundation box designed for fitting the SUB left-hand operator

FCS SX Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf

BTCF 120 E Foundation box with levers for ELI 250 N BT, ELI 250 N, ELI 250 N V. Release not supplied Foundation box with levers for ELI 250 N BT, ELI 250 N, ELI 250 N V. Release not supplied

BTCF 120 E INOX Stainless steel foundation box with levers for ELI 250 N BT, ELI 250 N, ELI 250 N V. Release not provided Stainless steel foundation box with levers for ELI 250 N BT, ELI 250 N, ELI 250 N V. Release not provided

FCS BT Foundation box for SUB BT series operators Foundation box for SUB BT series operators

FLANGE RANCH C Flange for Ranch C Flange for Ranch C

FLANGE RANCH D Flange for Ranch D Flange for Ranch D

BSC Arm for installation of SUB out of the gate axis Arm for installation of SUB out of the gate axis

BL E5 Long articulated arm for E5 Long articulated arm for E5

BS E5 Slide lever for E5. Increases maximum opening angle to 180° Slide lever for E5. Increases maximum opening angle to 180°

E180 Accessory for opening to 180° for ELI 250, ELI 250 V operator Accessory for opening to 180° for ELI 250, ELI 250 V operator

PBE Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m. Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.

CBA Straight telescopic arms for the installation of PHEBE series operators on overhead door Straight telescopic arms for the installation of PHEBE series operators on overhead door

CBAC Curved telescopic arms for the installation of PHEBE series operators on overhead door Curved telescopic arms for the installation of PHEBE series operators on overhead door

CBAS Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm

CBASL Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm

CAS1 Straight arm accessories for installation of one Berma operator =L=1000mm Spain version Straight arm accessories for installation of one Berma operator =L=1000mm Spain version

CAS2 Straight arm accessories for installation of two Berma operators L=1000mm Spain version Straight arm accessories for installation of two Berma operators L=1000mm Spain version

CAS1L Straight arm accessories for installation of one Berma operator =L=1500mm Spain version Straight arm accessories for installation of one Berma operator =L=1500mm Spain version

CAS2L Straight arm accessories for installation of two Berma operators L=1500mm Spain version Straight arm accessories for installation of two Berma operators L=1500mm Spain version

ASW XL RIG Vista SW XL rigid pull arm. Jamb max dimens.: 100mm Vista SW XL rigid pull arm. Jamb max dimens.: 100mm

ASW XL ART Vista SW XL articulated push arm. Max jamb dimens.: 150mm Vista SW XL articulated push arm. Max jamb dimens.: 150mm

ASW XL ARTL Vista SW XL long articulated push arm. Jamb dimens. 150mm Vista SW XL long articulated push arm. Jamb dimens. 150mm

EXT ASW XL 30 Arm connection L=30 Vista SW XL, spacer Arm connection L=30 Vista SW XL, spacer

EXT ASW XL 50 Arm connection L=50 Vista SW XL, spacer Arm connection L=50 Vista SW XL, spacer

EXT ASW XL 70 Arm connection L=70 Vista SW XL, spacer Arm connection L=70 Vista SW XL, spacer

EXT ASW XL 90 Arm connection L=90 Vista SW XL, spacer Arm connection L=90 Vista SW XL, spacer

BRTS Triangular arm with slide for overhead doors. For Botticelli B CRC 480 and Eos 120 operators. Triangular arm with slide for overhead doors. For Botticelli B CRC 480 and Eos 120 operators.

TA BIN Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs) Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs)

BIN120 CATENA 2900 Chain rail for EOS 120, length 2900 mm, useful travel 2400 mm Chain rail for EOS 120, length 2900 mm, useful travel 2400 mm

BIN CATENA 3500 Chain rail for EOS 120, length 3500 mm, useful travel 3000 mm Chain rail for EOS 120, length 3500 mm, useful travel 3000 mm

BIN CHAIN 2X1450 Chain rail divided into two halves for Botticelli, length 2900, travel 2,400 millimetres Chain rail divided into two halves for Botticelli, length 2900, travel 2,400 millimetres

BIN CHAIN 2X1750 Chain rail divided into two halves for Botticelli, length 3500, travel 3000 millimetres Chain rail divided into two halves for Botticelli, length 3500, travel 3000 millimetres

BIN B Gda 3020 Cat Chain rail for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm Chain rail for TIZIANO B GDA, length 3020 mm, useful travel 2560 mm

BIN B Gda 3620 Cat Chain rail for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm Chain rail for TIZIANO B GDA, length 3620 mm, useful travel 3160 mm

BIN B Gda 2x1510 Cat Chain track divided into two halves for TIZIANO B GDA, length 2x1510 mm, useful travel 2560 mm Chain track divided into two halves for TIZIANO B GDA, length 2x1510 mm, useful travel 2560 mm

BIN B Gda 2x1810 Cat Chain track divided into two halves for TIZIANO B GDA, length 2x1810 mm, useful travel 3160 mm Chain track divided into two halves for TIZIANO B GDA, length 2x1810 mm, useful travel 3160 mm

BIN Catena 2900 Sint Chain rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm Chain rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm

BIN Catena 3500 Sint Chain rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm Chain rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm

BIN Catena 2X1750 Sint Chain rail divided into two halves for BOTTICELLI, length 2x1750, travel 3000 mm Chain rail divided into two halves for BOTTICELLI, length 2x1750, travel 3000 mm

BIN BELT 2X1450 Pig FE50 Guide rail with belt, divided into two halves for Botticelli, length 2x1450, travel 2400 mm Guide rail with belt, divided into two halves for Botticelli, length 2x1450, travel 2400 mm

BIN120 CATENA 2X 1750 Chain rail 2 parts Chain rail 2 parts

BIN120 CATENA 2X 1450 Chain rail 2 parts Chain rail 2 parts

BIN Cinghia 2900 Pig FE Belt rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm Belt rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm

BIN Cinghia 3500 Pig FE Belt rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm Belt rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm

BIN CINGHIA 2X1750 Pig FE Belt rail divided into two halves for BOTTICELLI, length 3500, travel 3000 millimetres Belt rail divided into two halves for BOTTICELLI, length 3500, travel 3000 millimetres

BIN B GDA 3020 BELT Monoblock belt rail, length 3020 mm, useful length 2560 mm Monoblock belt rail, length 3020 mm, useful length 2560 mm

BIN B GDA 3620 BELT Monoblock belt rail, length 3620 mm, useful length 3160 mm Monoblock belt rail, length 3620 mm, useful length 3160 mm

BIN B GDA 2x1510 BELT Two-piece monoblock belt rail, length 3020 mm, useful length 2560 mm Two-piece monoblock belt rail, length 3020 mm, useful length 2560 mm

BIN B GDA 2x1810 BELT Two-piece monoblock belt rail, length 3620 mm, useful length 3160 mm Two-piece monoblock belt rail, length 3620 mm, useful length 3160 mm

BCP Short welding base for PHEBE series operators (L 578 mm) Short welding base for PHEBE series operators (L 578 mm)

BLP Long welding base for PHEBE series operators (L 1600 mm) Long welding base for PHEBE series operators (L 1600 mm)

CTBP Set of tubes to complete Phebe Kit - CTBP Set of tubes to complete Phebe Kit - CTBP

CTA 2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators 2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators

CTA2 Pack of 2 20x20 square drive tubes length 200 mm CTA2 Pack of 2 20x20 square drive tubes length 200 mm CTA2

CA1 Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width Straight arm accessories for installation of one BERMA series operator on overhead door of 4 m max width

CA2 Straight arm accessories for installation of two BERMA series operators on overhead door Straight arm accessories for installation of two BERMA series operators on overhead door

CA2C Accessories for the installation of two BERMA series operators on overhead door (curved arms) Accessories for the installation of two BERMA series operators on overhead door (curved arms)

THEKE B PRA 01 Metal protection box for ARES and ICARO series sliding operators Metal protection box for ARES and ICARO series sliding operators

CKK Pack of mounting tabs for ARGO and ARGO G Pack of mounting tabs for ARGO and ARGO G

WMP SL SLC Contains 2 crossbeam support profiles of length L = 1m each Contains 2 crossbeam support profiles of length L = 1m each

PRV AA SL Leaf attachment profile for Vista SL Leaf attachment profile for Vista SL

SRV DIN Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...
Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block

FCS MU68 2 additional limit switches for Maxima Ultra from 6 to 8m 2 additional limit switches for Maxima Ultra from 6 to 8m

FCS MAXIMA 5 2 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35 2 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35

FCS MAXIMA 6-8 2 additional limit switches for MAXIMA 60/80 2 additional limit switches for MAXIMA 60/80

TL 60 KIT Basic accessories kit for installation of an actuator, necessary for all motors (10 to 50 Nm) without handle release. Basic accessories kit for installation of an actuator, necessary for all motors (10 to 50 Nm) without handle release.

TL 60 M KIT Basic accessories kit for installation of an actuator with handle release. Necessary for proper installation. Basic accessories kit for installation of an actuator with handle release. Necessary for proper installation.

SM504 Support with bearing for octagonal roller - screw type Support with bearing for octagonal roller - screw type

SM505 Support for octagonal roller - cementing type Support for octagonal roller - cementing type

AD 5027 Drive wheel and limit switch adapter for RUL60 Drive wheel and limit switch adapter for RUL60

SM5013 Wall-mounted orientable support for operators with manual release Wall-mounted orientable support for operators with manual release

SM5014 Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm). Wall support for operators with square snap pin and split pin for direct coupling, suitable for all operators (from 10Nm to 50Nm).

SM5015 Wall-mounted two-position orientable support for operators with manual release Wall-mounted two-position orientable support for operators with manual release

AD5028 Octagonal adapter Ø 70 mm zamak Octagonal adapter Ø 70 mm zamak

AD5029 Round adapter Ø 63X1.5mm Round adapter Ø 63X1.5mm

AD5030 Deprat LP62 adapter Deprat LP62 adapter

AD5031 Deprat LP89 adapter Deprat LP89 adapter

AD5032 ZF 64 adapter ZF 64 adapter

AD5034 ZF 54 adapter ZF 54 adapter

AD5035 Ogive adapter Ø78 Ogive adapter Ø78

AD5036 Octagonal adapter 60 PL Octagonal adapter 60 PL

AD5038 Metallic ogive adapter Ø70 Metallic ogive adapter Ø70

MM8 Manual operation eye-ring Manual operation eye-ring

MM9 45° universal joint for manual operation 45° universal joint for manual operation

MM10 90° universal joint for manual operation 90° universal joint for manual operation

MM11 1.5 m articulated boom with hook for manual operation 1.5 m articulated boom with hook for manual operation

MM12 1.5 m rigid boom with hook for manual operation 1.5 m rigid boom with hook for manual operation

BLOCCANTI 40 Anti-break-in block for shutters with slats of height 40 mm. Anti-break-in block for shutters with slats of height 40 mm.

BLOCCANTI 50 Anti-break-in block for shutters with slats of height 50 mm. Anti-break-in block for shutters with slats of height 50 mm.

XPASS 800 ALARM - -

PILLAR ALARM Magnetic anti-theft kit for PILLAR B hydraulic bollards. To be requested when ordering Magnetic anti-theft kit for PILLAR B hydraulic bollards. To be requested when ordering

RUL 60/1,5 Octagonal shutter winding roller diameter 60 x 1.5 m. Octagonal shutter winding roller diameter 60 x 1.5 m.

RUL 60/3 Octagonal shutter winding roller diameter 60 x 3 m. Octagonal shutter winding roller diameter 60 x 3 m.

RUL 60/6 Octagonal shutter winding roller diameter 60 x 6 m. Octagonal shutter winding roller diameter 60 x 6 m.

CAL 60/100 Adjustable telescopic octagonal cover for RUL 60. Adjustable telescopic octagonal cover for RUL 60.

CAL 60/30 Octagonal cover for RUL 60. Octagonal cover for RUL 60.

ART 90 Q 90° articulated joint for Moovi and Giotto booms. Max 4m clear passage. 90° articulated joint for Moovi and Giotto booms. Max 4m clear passage.

ZFAF2 Additional anchor plates for cementing FAF2 forks to ground. Additional anchor plates for cementing FAF2 forks to ground.

PCA N3 Top and bottom rubber cover profile for booms of 3 m max. Top and bottom rubber cover profile for booms of 3 m max.

PCA N4 Top and bottom rubber cover profile for booms of 4 m max. Top and bottom rubber cover profile for booms of 4 m max.

PCA N5 Top and bottom rubber cover profile for booms of 5 m max. Top and bottom rubber cover profile for booms of 5 m max.

ACTR Pack of 12 additional reflective labels (1 pack already included with each boom) Pack of 12 additional reflective labels (1 pack already included with each boom)

PCA N6 Top and bottom rubber cover profile for booms of 6 m max. Top and bottom rubber cover profile for booms of 6 m max.

PCA N8 Top and bottom rubber cover profile for booms of 8 m max. Top and bottom rubber cover profile for booms of 8 m max.

PRV-CHN 10 Chain for access points up to 10 m, Ø 8 mm wire . Armoured lock not included. Chain for access points up to 10 m, Ø 8 mm wire . Armoured lock not included.

PRV-CHN 16 Chain for access points up to 16 m, wire Ø 4.5 mm. Armoured lock not included. Chain for access points up to 16 m, wire Ø 4.5 mm. Armoured lock not included.

CHN-DRIVE 2 Floor guide for chain housing Floor guide for chain housing

OMEGA ATML U Single clamping, hand guard and screws for ATML bar on Maxima_68 Ultra. Bar not included. Single clamping, hand guard and screws for ATML bar on Maxima_68 Ultra. Bar not included.

OMEGA FRC ATML U 0 0

OMEGA ATM FRA Fracture system clamping for bar ATM Fracture system clamping for bar ATM

ATML60 Aluminium bar L= 6m ø 92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging. Aluminium bar L= 6m ø 92 mm. Lights and rubber not included. Completely protected by new polystyrene packaging.

OMEGA FRC ATML 0 0

RST ATM Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars. Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

GA ATM Adjustable suspended foot, powder coated cataphoresis treated. Adjustable suspended foot, powder coated cataphoresis treated.

KIT ATM LIGHT 3 R/G Red-green LED lights kit for fitting on ATM bars up to 3m. Red-green LED lights kit for fitting on ATM bars up to 3m.

KIT ATM LIGHT 5 R/G Red-green LED lights kit for fitting on ATM bars up to 5m. Red-green LED lights kit for fitting on ATM bars up to 5m.

KIT ATML LIGHT 8 R/G Red-green LED lights kit for fitting on ATML bars up to 8 m. Red-green LED lights kit for fitting on ATML bars up to 8 m.

PCA ATM 3 Rubber protection (red) for fitting on bar L= 3m max. Rubber protection (red) for fitting on bar L= 3m max.

PCA ATM 5 Rubber protection (red) for fitting on bar L= 5m max. Rubber protection (red) for fitting on bar L= 5m max.

PCA ATM 8 Protection rubber (black) for fitting on bars from L=6m to 8m. Protection rubber (black) for fitting on bars from L=6m to 8m.

MLR2.5 Red spring - MAXIMA Utra 35 Ref. spring table Red spring - MAXIMA Utra 35 Ref. spring table

MLB3 Blue spring - MAXIMA Ultra 35 Ref. spring table Blue spring - MAXIMA Ultra 35 Ref. spring table

MLV5 Green spring - MAXIMA Ultra 35 Ref. spring table Green spring - MAXIMA Ultra 35 Ref. spring table

MLC7.5 White spring - MAXIMA Ultra 68. Ref. spring table White spring - MAXIMA Ultra 68. Ref. spring table

MLC9 Yellow spring - Maxima Ultra 68. Ref. spring table Yellow spring - Maxima Ultra 68. Ref. spring table

OMEGA ATML Single clamping, hand guard and screws for ATML bar on MAXIMA 60/80. Bar not included. Single clamping, hand guard and screws for ATML bar on MAXIMA 60/80. Bar not included.

ATM30 180° RG Articulated bar 3m 180° with lights R/G Articulated bar 3m 180° with lights R/G

ATM50 180° RG 5m. articulated bar 180° with lights R/G 5m. articulated bar 180° with lights R/G

ATM30 90° RG Articulated bar 90° L=3 with lights R/G Articulated bar 90° L=3 with lights R/G

ATM50 90° RG Articulated bar 90° L=5 with lights R/G Articulated bar 90° L=5 with lights R/G

TWIN CHN PADLOCK Armoured lock for Twin chain closing Armoured lock for Twin chain closing

GA AQ AT Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) Movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers)

GAMA AQ AT Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers) Dampened movable support leg for AQ or AT booms (on MOOVI, MICHELANGELO and GIOTTO barriers)

CBO Anchor base for MOOVI and GIOTTO series barriers Anchor base for MOOVI and GIOTTO series barriers

SB Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm) Aluminium skirt for road barrier booms. Price per linear metre (Calculate length of useful passage minus 40cm)

AT 502 Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m. Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 2.6 m.

AT 504 Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m. Second part of telescopic round boom for MICHELANGELO, diam. 50 mm, length 4.6 m.

AT 704 First part of telescopic round boom for MICHELANGELO, diam. 70 mm, length 4.3 m. First part of telescopic round boom for MICHELANGELO, diam. 70 mm, length 4.3 m.

AT 706 Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m Round boom diam. 70 mm length 6.35 m for MICHELANGELO. for openings up to 6 m

AQ6 Complete 6 m rectangular boom for MICHELANGELO Complete 6 m rectangular boom for MICHELANGELO

BM Anchor base for MICHELANGELO series barriers Anchor base for MICHELANGELO series barriers

GAM Mobile rest leg for BGV barrier boom (not usable on BGV 30) Mobile rest leg for BGV barrier boom (not usable on BGV 30)

OMEGA AQ S/STEEL Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX Pack of accessories for installation of 3/5 m rectangular boom for MOOVI INOX

OMEGA AQ Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO Pack of accessories for installation of 3/5 m rectangular boom for MOOVI/GIOTTO

OMEGA AT Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO Pack of accessories for installation of 3/6 m round boom for MOOVI/GIOTTO

AT3 Complete 3 metre round boom for MOOVI/GIOTTO Complete 3 metre round boom for MOOVI/GIOTTO

AT5 Complete 5 metre round boom for MOOVI/GIOTTO Complete 5 metre round boom for MOOVI/GIOTTO

AQ3 Complete 3-metre rectangular boom for MOOVI/GIOTTO Complete 3-metre rectangular boom for MOOVI/GIOTTO

AQ5 Complete 5 metre rectangular boom for GIOTTO and MOOVI Complete 5 metre rectangular boom for GIOTTO and MOOVI

AT6 Complete 6 metre round boom for MOOVI/GIOTTO Complete 6 metre round boom for MOOVI/GIOTTO

FAF 2 Rest fork for booms. For bolting to ground. Rest fork for booms. For bolting to ground.

ATM25 Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...
Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

ATM30 Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...
Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

ATM40 Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...
Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging

ATM50 Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...
Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

ATML EXT2 Extension L=2m for bar model ATML 60. Lights and rubber not included. Extension L=2m for bar model ATML 60. Lights and rubber not included.

TCAP Top covering without lights for elements of Totem. Top covering without lights for elements of Totem.

THERMO Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C Thermostatically controlled heating element for use of GIOTTO BT A, MOOVI, MICHELANGELO BT A barriers to ambient temperatures of -40°C

BIR C Barra sensible de goma de 30 mm de altura. Precio por metro, suministro por metros enteros. Barra sensible de goma de 30 mm de altura. Precio por metro, suministro por metros enteros.

BAR C BA 2 Double profile rubber safety edge with lip seals (L 2000 x H 60 mm) Double profile rubber safety edge with lip seals (L 2000 x H 60 mm)

ELA SL 24.B KIT Kit for assembly of 5 elastic mechanical safety opening systems (according to CO48) for Vista SL. For laboratory use. Kit for assembly of 5 elastic mechanical safety opening systems (according to CO48) for Vista SL. For laboratory use.

ELA SLC 24.B KIT Kit for assembly of 5 elastic mechanical safety opening systems (according to CO48) for Vista SLC. For laboratory use. Kit for assembly of 5 elastic mechanical safety opening systems (according to CO48) for Vista SLC. For laboratory use.

PPA TL 1600 N Clamps for glass leaf, 1600 mm, natural Clamps for glass leaf, 1600 mm, natural

PPA TL 1600 O Clamps for glass leaf, 1600 mm, anodised Clamps for glass leaf, 1600 mm, anodised

PPA TL 3200 N Clamps for glass leaf, 3200 mm, natural Clamps for glass leaf, 3200 mm, natural

PPA TL 3200 O Clamps for glass leaf, 3200 mm, anodised Clamps for glass leaf, 3200 mm, anodised

ERV Electric lock for VISTA SL, SL C, TL (use in conjunction with BBV recommended) Electric lock for VISTA SL, SL C, TL (use in conjunction with BBV recommended)

X EF1 Electric brake for Wind Rmc and Rmb 230V Electric brake for Wind Rmc and Rmb 230V

SASAM 1 Antipanic breakthrough system in anodised aluminium, 1 leaf. Length mx 1100 mm Antipanic breakthrough system in anodised aluminium, 1 leaf. Length mx 1100 mm

SASAM 2 Antipanic breakthrough system in anodised aluminium, 2 leaves. Length mx 1100 mm Antipanic breakthrough system in anodised aluminium, 2 leaves. Length mx 1100 mm

PIG 12/ULISSE S Z12 pinion gear for industrial sectional doors, for 1" (25.4 mm) shafts Z12 pinion gear for industrial sectional doors, for 1" (25.4 mm) shafts

PIG 14/ULISSE S Z14 pinion gear for industrial sectional doors, for 1" (25.4 mm) shafts Z14 pinion gear for industrial sectional doors, for 1" (25.4 mm) shafts

PIG 18/ULISSE S Z18 pinion gear for industrial sectional doors, for 1" (25.4 mm) shafts Z18 pinion gear for industrial sectional doors, for 1" (25.4 mm) shafts

PIG 30/ULISSE S Z30 pinion gear for industrial sectional doors, for 1" (25.4 mm) shafts Z30 pinion gear for industrial sectional doors, for 1" (25.4 mm) shafts

COR 30 Z30 gear kit complete with accessories for industrial sectional doors, for 1" (25.4 mm) shafts Z30 gear kit complete with accessories for industrial sectional doors, for 1" (25.4 mm) shafts

COR 40 Z40 gear kit complete with accessories for industrial sectional doors, for 1" (25.4 mm) shafts Z40 gear kit complete with accessories for industrial sectional doors, for 1" (25.4 mm) shafts

HIDE HINGE INF Bottom fixed hinge for the installation of HIDE SW series operator Bottom fixed hinge for the installation of HIDE SW series operator

HIDE HINGE SUP Top hinge for the installation of HIDE SW series operator Top hinge for the installation of HIDE SW series operator

RB 4-channel wall-mounted radio control with rolling code 4-channel wall-mounted radio control with rolling code

COMPASS - ISOCARD ISO standard proximity badge ISO standard proximity badge

COMPASS - RING Key-ring transponder for access control Key-ring transponder for access control

BOX Wall-mounted safe for steel cable release and electric control Wall-mounted safe for steel cable release and electric control

PUSH PLATE Activation button Activation button

MAGIC SWITCH Activation touch button Activation touch button

Q.BO TOUCH Wireless digital touchpad with 433MHz rolling code operation. Manages up to 10 channels and 100 codes. Wireless digital touchpad with 433MHz rolling code operation. Manages up to 10 channels and 100 codes.

VISTA SEL Function selector for pedestrian door series VISTA SL, SL C, TL Function selector for pedestrian door series VISTA SL, SL C, TL

FALCON Industrial presence sensor installable up to 7 m Industrial presence sensor installable up to 7 m

Vista SEL SW Function selector Vista SW Function selector Vista SW

VIO-M Compact mono-directional activation sensor Compact mono-directional activation sensor

VIO-DT2 Safety and bi-directional activation sensor, dual technology, monitored Safety and bi-directional activation sensor, dual technology, monitored

VIO-DT1 Safety and mono-directional activation sensor, dual technology, monitored Safety and mono-directional activation sensor, dual technology, monitored

IXIO-DT1 Safety and mono-directional activation sensor, dual technology, monitored, programmable c.telecom. Safety and mono-directional activation sensor, dual technology, monitored, programmable c.telecom.

VIO-ST Infrared safety sensor, monitored Infrared safety sensor, monitored

4SAFE IR SAFETY SENSOR MONIT.SW/1MOD/700 Monitored IR safety sensor for side-hung leaves, 1 module, 700mm Monitored IR safety sensor for side-hung leaves, 1 module, 700mm

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/700 Monitored IR safety sensor for side-hung leaves, 2 modules, 700mm Monitored IR safety sensor for side-hung leaves, 2 modules, 700mm

4SAFE IR SAFETY SENSOR MONIT.SW/2MOD/900 Monitored IR safety sensor for side-hung leaves, 2 modules, 900mm Monitored IR safety sensor for side-hung leaves, 2 modules, 900mm

TP MAXIMA ULTRA Thermal probe for Maxima Ultra barriers Thermal probe for Maxima Ultra barriers

Timer Weekly programmer for REEL RADIO or external ER-1 receiver Weekly programmer for REEL RADIO or external ER-1 receiver

Pad Rcd 01 R 1-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver 1-channel remote control for REEL RUA, LOOP RADIO and ER-1 receiver

Pad Rcd 05 R 5-channels remote control for REEL RUA, LOOP RADIO and ER-1 receiver 5-channels remote control for REEL RUA, LOOP RADIO and ER-1 receiver

Pad Rcd 01 F Wall-mounted radio control with rolling code Wall-mounted radio control with rolling code

CLIP1 B 00 R03 Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs Clip for hooking KLEIO B RCA and MITTO B RCB series remote controls to belt or sun visor. Supplied in pack of 30pcs

CLIP B 00 R04 Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack Wall mounting clip for KLEIO B RCA and MITTO B RCB remote controls. 30 unit pack

Mitto B Rcb02 R1 Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

Mitto B Rcb04 R1 Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

MITTO B RCB04 R1 VINEYARD Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: Vineyard Red Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: Vineyard Red

MITTO B RCB04 R1 SUNRISE Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: Sunrise Yellow Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: Sunrise Yellow

MITTO B RCB04 R1 CLEAR ICE Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: Clear Ice White Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Colour: Clear Ice White

U-PROG Programmer for radio control units and receivers with possibility of wired or BlueTooth connection Programmer for radio control units and receivers with possibility of wired or BlueTooth connection

AXXEDO BOX control box equipped with DIN rails control box equipped with DIN rails

AXXEDO NOISE FILTER The Noise Filter kit comprises two filters that protect the AXXEDO line devices from noise generated by inductive loads (e.g. relay coils,...
The Noise Filter kit comprises two filters that protect the AXXEDO line devices from noise generated by inductive loads (e.g. relay coils, electric lock coils, etc.) and transients (voltage peaks)

AXXEDO POWER 24 Vdc 2.0A switching power supply for DIN rail mounting 24 Vdc 2.0A switching power supply for DIN rail mounting

VIRGO BAT Set of backup batteries for VIRGO Set of backup batteries for VIRGO

BT BAT Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO

CB EOS Set of backup batteries for VENERE D Set of backup batteries for VENERE D

BT BAT1 Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor

ECOSOL CHARGER Battery chargers for ECOSOL BOX and ECOSOL DOUBLE Battery chargers for ECOSOL BOX and ECOSOL DOUBLE

MCL BT A BAT KIT Set of backup batteries for MICHELANGELO BT A barriers Set of backup batteries for MICHELANGELO BT A barriers

BAT KIT 1 Set of backup batteries for GIOTTO series barriers. Not compatible with GIOTTO BT A Set of backup batteries for GIOTTO series barriers. Not compatible with GIOTTO BT A

BBV SLC TL Battery powered anti-panic device for VISTA SL C, TL Battery powered anti-panic device for VISTA SL C, TL

BBT BAT Set of backup batteries for THALIA and THALIA P Set of backup batteries for THALIA and THALIA P

SL BAT2 Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A. Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

GIOTTO M BG BAT KIT Buffer battery kit for Giotto BT A series barrier Buffer battery kit for Giotto BT A series barrier

BATT-EB Backup battery kit to allow bollards to stay up in case of no power Backup battery kit to allow bollards to stay up in case of no power

BBV BATT MODULO VISTA SL Set of backup batteries for VISTA SL Set of backup batteries for VISTA SL

SCS 1 Serial board for connection to zone and opposing leaves for control units with display While stocks last Serial board for connection to zone and opposing leaves for control units with display While stocks last

SCS WIE Board for connection of SELETTO (E) push-button panel and COMPASS SLIM proximity reader Until stocks last Board for connection of SELETTO (E) push-button panel and COMPASS SLIM proximity reader Until stocks last

ME Control board for 12Vac solenoid lock for 230V automation systems Control board for 12Vac solenoid lock for 230V automation systems

ME BT Control board for 24Vac solenoid lock for 24V automation systems Control board for 24Vac solenoid lock for 24V automation systems

SCHEDA MCL KIT Control board for KIT MCL LIGHT and KIT MCL LAMPO Control board for KIT MCL LIGHT and KIT MCL LAMPO

B EBA BLUE GATEWAY Expansion board for BLUETOOTH connection management Expansion board for BLUETOOTH connection management

B EBA WIE DRIVER Expansion card for connection of WIEGAND accessories, compatible with U-Link control units Expansion card for connection of WIEGAND accessories, compatible with U-Link control units

B EBA RS 485 LINK Expansion board for connection of central units with serial controls management Expansion board for connection of central units with serial controls management

B EBA BLUE ENTRY ANDROID 16 BLUE-TOOTH expansion card for Blue Entry system. Manages up to 16 smartphones with the Android operating system BLUE-TOOTH expansion card for Blue Entry system. Manages up to 16 smartphones with the Android operating system

B EBA BLUE ENTRY ANDROID 4 BLUE-TOOTH expansion card for Blue Entry system. Manages up to 4 smartphones with the Android operating system BLUE-TOOTH expansion card for Blue Entry system. Manages up to 4 smartphones with the Android operating system

B EBA BLUE ENTRY ANDROID 8 BLUE-TOOTH expansion card for Blue Entry system. Manages up to 8 smartphones with the Android operating system BLUE-TOOTH expansion card for Blue Entry system. Manages up to 8 smartphones with the Android operating system

B EBA TCP/IP GATEWAY Remote management of automation systems with U-Link in TCP/IP network. Remote management of automation systems with U-Link in TCP/IP network.

ECOSOL DOUBLE Expansion board with batteries Included Expansion board with batteries Included

CLONIX 2E AC U-LINK 230 433MHz external receiver with 2 outputs with NO contact. Compatible with U-LINK protocol (with 3 connection slots). Power supply 230V,...
433MHz external receiver with 2 outputs with NO contact. Compatible with U-LINK protocol (with 3 connection slots). Power supply 230V, 2048-position memory

CLONIX UNI AC U-LINK 230V 433MHz external receiver with 3 outputs: 2 with NO contact and one NO/NC configurable. Compatible with U-LINK protocol (with 3 connection...
433MHz external receiver with 3 outputs: 2 with NO contact and one NO/NC configurable. Compatible with U-LINK protocol (with 3 connection slots). Power supply 230V, 2048-position memory

ANEM Anemometric ​​sensor with encoder for wind Anemometric ​​sensor with encoder for wind

CREP Twilight sensor Twilight sensor

CLONIX 2 Dual channel 433 MHz rolling code plug-in receiver. 128-position memory Dual channel 433 MHz rolling code plug-in receiver. 128-position memory

RTD CA 2048 Four-channel rolling code receiver with 2048 codes and built-in programming display. Usable with COMPASS Four-channel rolling code receiver with 2048 codes and built-in programming display. Usable with COMPASS

CLONIX 2 2048 Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory

CLONIX 2E External dual channel 433 MHz rolling code receiver. 128-position memory External dual channel 433 MHz rolling code receiver. 128-position memory

CLONIX 4 RTE External 4-channel 433 MHz rolling code receiver. Power relay outputs (16A 230v) External 4-channel 433 MHz rolling code receiver. Power relay outputs (16A 230v)

ER 1 External receiver for REEL RUA series operators. Compatible with PAD series transmitters External receiver for REEL RUA series operators. Compatible with PAD series transmitters

MIME AC Récépteur bicanal à usage interne 433MHz, 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable,...
Récépteur bicanal à usage interne 433MHz, 2 independent outputs 230 Vac power supply 30-position memory Operating mode: monostable, bistable, timed, motor control

KIT LIGHT1 Lights for booms over 4.5 m Lights for booms over 4.5 m

KIT LIGHT Lights on boom 3 or 4.5 m Lights on boom 3 or 4.5 m

MCL LAMPO KIT Integrated flashing light. The MCL CARD KIT is needed for operation Integrated flashing light. The MCL CARD KIT is needed for operation

MCL LIGHT KIT Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation Light kit (6 lights) for boom. For use in conjunction with PCA. The MCL CARD KIT is necessary for operation

ACOUSTIC DETECTOR Adjustable acoustic detector for sirens Adjustable acoustic detector for sirens

CMS Sign Sign

B 00 R01 Protección metálica para B LTA Protección metálica para B LTA

B 00 R02 Soporte mural para luz intermitente de la serie B LTA Soporte mural para luz intermitente de la serie B LTA

STOPPY ALARM Anti-theft kit: to be ordered separately, assembled during production Anti-theft kit: to be ordered separately, assembled during production

KIT FPA1 FPA kit with pair of photocells and brackets for Vista FPA kit with pair of photocells and brackets for Vista

KIT FPA2 FPA kit with two pairs photocells and brackets for Vista FPA kit with two pairs photocells and brackets for Vista

STR Pair of infrared STR sensors for ERIS A30 Pair of infrared STR sensors for ERIS A30

VENTIMIGLIA NS Dispositivo de infrarrojos para barras sensibles BIR C o BAR C (según norma UNE-EN 12978) Dispositivo de infrarrojos para barras sensibles BIR C o BAR C (según norma UNE-EN 12978)

SCC Release for ELI 250N and SUB BT with lever key. Release for ELI 250N and SUB BT with lever key.

CLS Triangular release key l=52mm Triangular release key l=52mm

ST Automatic bolt release for sectional doors Automatic bolt release for sectional doors

SET/S External release for insulated sectional and overhead doors of thickness up to 50 mm. SET/S External release for insulated sectional and overhead doors of thickness up to 50 mm. SET/S

RCA Lever release for ARGO with steel cable, length 3.5 m Lever release for ARGO with steel cable, length 3.5 m

RCAL Lever release for ARGO with steel cable, length 6 m Lever release for ARGO with steel cable, length 6 m

SM1 External manual release for overhead garage door (1 operator) External manual release for overhead garage door (1 operator)

SM2 External manual release for overhead garage door (2 operators) External manual release for overhead garage door (2 operators)

SEB External key release for BERMA, FORB, IGEA LB and IGEA LB BTì External key release for BERMA, FORB, IGEA LB and IGEA LB BTì

SCP Release for ELI 250 and SUB BT with personal key. Release for ELI 250 and SUB BT with personal key.

DCW BAT Pack of 12 batteries for photocell safety edge, compatible with DCW, TANGO, ERIS A30 Pack of 12 batteries for photocell safety edge, compatible with DCW, TANGO, ERIS A30

PHP Par de columnas de aluminio para fotocélulas THEA y DESME. Altura 522 mm Par de columnas de aluminio para fotocélulas THEA y DESME. Altura 522 mm

PHP2 Pair of double aluminium posts for THEA/DESME series photocells. Height 1038 mm Pair of double aluminium posts for THEA/DESME series photocells. Height 1038 mm

APL Pair of foundation plates for PHP posts Pair of foundation plates for PHP posts

PHP ADA CC Pair of adapters for the installation of THEA/DESME photocells on CC posts Pair of adapters for the installation of THEA/DESME photocells on CC posts

PHP ADA Pair of adapters for the installation of AKTA photocells on PHP posts Pair of adapters for the installation of AKTA photocells on PHP posts

PHP BA1 Support for mounting THEA/DESME photocells on Giotto, Moovi and Michelangelo enclosures Support for mounting THEA/DESME photocells on Giotto, Moovi and Michelangelo enclosures

PHP BI Dual-face adapter for THEA/DESME photocells Dual-face adapter for THEA/DESME photocells

ACV20 Vandal-proof protection for DESME photocells Vandal-proof protection for DESME photocells

ACV30 Vandal-proof protection for AKTA photocells Vandal-proof protection for AKTA photocells

PHP3 Pair of aluminium columns for Q.bo series selectors. Height 1038 mm Pair of aluminium columns for Q.bo series selectors. Height 1038 mm

SPIRA 2X1 Magnetic loop 2 x 1 m Magnetic loop 2 x 1 m

RME 1 BT 0 0

RME 2 0 0

SECURBASE PLUS USB Advanced management software for COMPASS access control system based on COMPASS SC. Advanced management software for COMPASS access control system based on COMPASS SC.

SECURBASE LIGHT USB Management software for COMPASS access control system based on COMPASS SC. Management software for COMPASS access control system based on COMPASS SC.

AXXEDO SCRATCH CARD 4 Scratch card containing the secret code enabling management of 4 entry points through axxedo soft Scratch card containing the secret code enabling management of 4 entry points through axxedo soft

AXXEDO SCRATCH CARD 16 Scratch card containing the secret code enabling management of 16 entry points through axxedo soft Scratch card containing the secret code enabling management of 16 entry points through axxedo soft

ALLU Power supply for Gas and Fixed Bollards with Lights 24 Vac (up to 80 bollards) Power supply for Gas and Fixed Bollards with Lights 24 Vac (up to 80 bollards)

ALLU MAXIMA Power supply for ATM LIGHT Kit on Maxima Power supply for ATM LIGHT Kit on Maxima

ALLU 2 MAXIMA ULTRA Power supply for ATM LIGHT Kit on Maxima Ultra Power supply for ATM LIGHT Kit on Maxima Ultra

Sorry, no results were found for your search.

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.