PILLAR B 275/800.10C LI
Product code P970106 00002Hydraulic bollard 230 V, shaft height 800 mm and diameter 273 mm. LED light cap and H adhesive strip: 100 mm approved. The shaft automatically lowers in case of a power failure. Stainless steel version.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partnerThis solution, included in the range of Bft hydraulic bollards, allows quick maintenance without the use of a shaft lifting crane.

Control unit | PERSEO CBE 230.P SD |
Power supply | 230 V |
Opening or closing time | 6.5 s |
Rod height | 800 mm |
Rod thickness | 10 mm |
Rod diameter | 273 mm |
Type of limit switch | REED magnetic sensor |
Slowdown | no |
Impact resistance | 20000 J |
Break-in proof | 667000 J |
Manual cycle | reversible in the absence of voltage |
Frequency of use | 3000 Op/gg |
Protection rating | IP67 |
Environmental conditions | -40 ÷ 60 °C |
Interconnectivity | no |

TOTEM UNIT
Cod. P800116
Modulo base per il TOTEM. Può essere usato sia come modulo inferiore sia come superiore. Utilizzato per il montaggio di accessori di comando. Copertura superiore non inclusa.
Modulo base per il TOTEM. Può essere usato sia come modulo inferiore sia come superiore. Utilizzato per il montaggio di accessori di...

TOTEM UNIT - RAL
Cod. P800116 00102
Modulo base per il TOTEM. Può essere usato sia come modulo inferiore sia come superiore. Utilizzato per il montaggio di accessori di comando. Copertura superiore non inclusa. RAL colour as requested.
Modulo base per il TOTEM. Può essere usato sia come modulo inferiore sia come superiore. Utilizzato per il montaggio di accessori di...

TLIGHTS
Cod. P800117
Traffic lights and top covering for totem

TPF
Cod. P800040
Foundation and anchor plate for totem

TCAP
Cod. P800108
Top covering without lights for elements of Totem.

TCAP - RAL
Cod. P800108 00102
Top covering without lights for elements of Totem. RAL colour as requested.

ACOUSTIC DETECTOR
Cod. D113705
Adjustable acoustic detector for sirens

RME 2
Cod. P111001 00003
230 V dual channel metal object detector with installation base

SPIRA 2X1
Cod. D110926 00001
Magnetic loop 2 x 1 m

BOLLARD CABLE EXT25
Cod. P800114
Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT50
Cod. P800115
Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)