Motor for swing gates up to 200 kg with articulated arm

VIRGO SMART BT A 20

Product code P930129 00002
  • DIMENSIONAL DIAGRAM
technical design VIRGO SMART BT A
Technologies
  • A precise, safe and reliable technology.
    Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
    Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
    The efficiency of the technology is a guarantee of the product's reliability.

  • The thrust required to operate safely.
    A smart torque management system based on the microprocessor technology of BFT control units.
    Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
    D-Track also facilitates the installer in providing for the certifications required by law.
    Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
    BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
    A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
    The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

  • The new coding system for direct cloning of remote controls.
    Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
    In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
    Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Irreversible electro-mechanical operator 24 V for swing gates up to 200 kg in weight and up to 2 m in length with integrated control unit.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technical Data
Control unit THALIA
Board power supply 230 V
Motor voltage 24 V
Power input 110 W
Max. width of door/gate wing 2 m
Max. weight of door/gate wing 200 kg
Maximum angle 120 °
Cycle time 14 s
Type of limit switch Electromechanical
Slowdown Yes
Locking Mechanical
Release Personal key
Impact reaction Electronic torque limiter
Frequency of use Semi intensive
Protection rating IP44
Environmental conditions -20 ÷ 55 °C
U-Link Yes
Video
Virgo Smart BTA
Virgo Smart BTA
Show
Accessories

Recommended accessories.

  • BOX Cod. N574039Wall safe for unlocking with steel cable and electrical control; cable not included.Wall safe for unlocking with steel cable and electrical control; cable not included.

  • VIRGO BAT Cod. P125008Set of backup batteries for VIRGO.Set of backup batteries for VIRGO.

  • ME BT Cod. D111761Control board for 24Vac solenoid lock for 24V automation systems.Control board for 24Vac solenoid lock for 24V automation systems.

  • LAS Cod. N728052VIRGO BT A slide lever.VIRGO BT A slide lever.

  • TFS Cod. P111775Virgo Smart BT A 3-wire board KIT (1 Kit per engine).Virgo Smart BT A 3-wire board KIT (1 Kit per engine).

  • AAP Cod. N999735VIRGO SMART BT A misaligned doors accessory.VIRGO SMART BT A misaligned doors accessory.

  • AMV Cod. N998600Virgo Smart BT A 20 mechanical stop KIT.Virgo Smart BT A 20 mechanical stop KIT.

  • RCA Cod. N733421Lever release for ARGO with steel cable, length 3.5 m.Lever release for ARGO with steel cable, length 3.5 m.

  • RCAL Cod. N733422Lever release for ARGO with steel cable, length 7 m.Lever release for ARGO with steel cable, length 7 m.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.