Simple and intuitive adjustment of limit switches
Adapters for 42 or 48 (RMB) or 76mm (RMC) shafts included in the pack
230V operators for roller shutters with maximum torque up to 445 Nm. Suitable for mounting on shutters with pulley diameter of 200, 220, 240 and 280mm shaft diameter 42, 48, 60, 76 and 101mm. Available in versions with or without electric brake.
Simple and intuitive adjustment of limit switches
Adapters for 42 or 48 (RMB) or 76mm (RMC) shafts included in the pack
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
Operatore per serrande con puleggia portamolle diametro 200 mm. Coppia massima 130 Nm e potenza assorbita pari a 400 W. Reversibile.
Operatore per serrande con puleggia portamolle diametro 200 mm. Coppia massima 130 Nm e potenza assorbita pari a 400 W. Sblocco con cavo in acciaio e pomello per elettrofreno.
Operatore per serrande con puleggia portamolle diametro 200 mm. Coppia massima 170 Nm e potenza assorbita pari a 600 W. Reversibile.
Operatore per serrande con puleggia portamolle diametro 200 mm. Coppia massima 170 Nm e potenza assorbita pari a 600 W. Sblocco con cavo in acciaio e pomello per elettrofreno.
Operatore per serrande con puleggia portamolle diametro 200 mm. Coppia massima 357 Nm e potenza assorbita pari a 1200 W. Sblocco con cavo in acciaio e pomello per elettrofreno.
Operatore per serrande con puleggia portamolle diametro 240 mm. Coppia massima 235 Nm e potenza assorbita pari a 600 W. Reversibile.
Operatore per serrande con puleggia portamolle diametro 240 mm. Coppia massima 235 Nm e potenza assorbita pari a 600 W. Sblocco con cavo in acciaio e pomello per elettrofreno.
Operatore per serrande con puleggia portamolle diametro 240 mm. Coppia massima 445 Nm e potenza assorbita pari a 1200 W. Sblocco con cavo in acciaio e pomello per elettrofreno.
Kit contenente operatore per serrande con puleggia portamolle diametro 200 mm. Coppia massima 130 Nm e potenza assorbita 400 W. Sblocco con cavo in acciaio e pomello per elettrofreno. Centrale di...
Kit contenente operatore per serrande con puleggia portamolle diametro 200 mm. Coppia massima 130 Nm e potenza assorbita 400 W. Sblocco con cavo in acciaio e pomello per elettrofreno. Cassaforte da...