SUB R WINTER DX
Product code P930012 00009In-ground 230 V irreversible hydraulic operator for swing gates up to 1.8 m with slowdown. Maneuver time 14+slowdown s. Right operator.
PLUS
The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.
The closing slowdown guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.
Control unit with programming display and new, simplified scenario-based programming
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
| Control unit | RIGEL 6 |
| Board power supply | 230 V |
| Motor voltage | 230 V |
| Power input | 250 W |
| Max. width of door/gate wing | 1.8 m |
| Max. weight of door/gate wing | 800 kg |
| Maximum angle | 130 ° |
| Cycle time | 14+slowdown s |
| Type of limit switch | work time |
| Slowdown | Yes |
| Locking | Open/close hydraulics |
| Release | Non reversing |
| Impact reaction | Hydraulic clutch |
| Frequency of use | very intensive |
| Protection rating | IP67 |
| Environmental conditions | -30 ÷ 60 °C |
| U-Link | no |
ALPHA SD Cod. D113680 00002Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide...
Universal control panel with potentiometers for one 230V/500W single-phase operator.
Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors.
Board power supply: 230V single-phase.
Operator power supply: 230V single phase 500W max.
Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver.
Main functions: fast closing, pulse blocking, gate open indicator light.
Compatibility: MIZAR.
FCS DX Cod. N733066 00003Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.
FCS SX Cod. N733066 00004Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf.
CPS DX Cod. N733066 00001Foundation box designed for fitting the SUB right-hand operator.Foundation box designed for fitting the SUB right-hand operator.
CPS SX Cod. N733066 00002Foundation box designed for fitting the SUB left-hand operator.Foundation box designed for fitting the SUB left-hand operator.
CPS G Cod. N733092Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.Weight-bearing foundation box for preparation for assembly of SUB G right and left operator.
BSC Cod. N728002Arm for installation of SUB out of the gate axis.Arm for installation of SUB out of the gate axis.
ME Cod. D111013Control board for 12Vac solenoid lock for 230V automation systems.Control board for 12Vac solenoid lock for 230V automation systems.
CLS/82 Cod. D610256Triangular release key for SUB operators l=82 mm.Triangular release key for SUB operators l=82 mm.
ALCOR AC A Cod. D114092 00002Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.Dip switch and potentiometer control panel for one or two 230 V/300 W operators for swing gates.
