In-ground 230 V hydraulic operator Triangle key for hinged leaves up to 1.8 m. Manoeuvre time 24 s. Right operator.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
|Control unit||RIGEL 6|
|Board power supply||230 V|
|Motor voltage||230 V|
|Power consumption||250 W|
|Max. width of door/gate wing||1.8 m|
|Max. weight of door/gate wing||800 kg|
|Maximum angle||130 °|
|Cycle time||24 s|
|Type of limit switch||work time|
|Impact reaction||Hydraulic clutch|
|Frequency of use||very intensive|
|Environmental conditions||-10 ÷ 60 °C|
ALCOR AC A
Cod. D114092 00002
Control unit with on-board receiver - no display - Standard terminal block
Triangular release key for SUB operators l=82 mm
Cod. N733066 00003
Foundation box designed for fitting the SUB right-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf
Cod. N733066 00004
Foundation box designed for fitting the SUB left-hand operator, allowing easy maintenance without ever having to disassemble the gate leaf
Cod. N733066 00001
Foundation box designed for fitting the SUB right-hand operator
Cod. N733066 00002
Foundation box designed for fitting the SUB left-hand operator
Weight-bearing foundation box for preparation for assembly of SUB G right and left operator
Arm for installation of SUB out of the gate axis
Control board for 12Vac solenoid lock for 230V automation systems
Pair of photocells adjustable 180 ° horizontally. Range 20m. Power supply 12 – 33Vac / 15 – 35Vdc
RADIUS LED AC A R0
Cod. D114094 00002
Flashing light without incorporated antenna for motors with power supply 230 V.
RADIUS LED AC A R1
Cod. D114093 00002
Flashing light with incorporated antenna for motors with power supply 230 V.