PHOBOS AC KIT A25 FRA

Product code R935304 00003

Complete kit 230 V for swing gates up to 400 kg in weight and 2.5 m in length.

Technologies

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit RIGEL 6. ALENA SW2
Board power supply 230 V
Motor voltage 230 V
Power consumption 210 W
Max. width of door/gate wing 2.5 m
Max. weight of door/gate wing 400 kg
Useful rod stroke 350 mm
Maximum angle 120 °
Cycle time 14 s
Type of limit switch work time
Slowdown Yes
Locking Mechanical
Release Personal key
Impact reaction Electronic clutch
Frequency of use Semi intensive
Protection rating IPX4
Environmental conditions -20 ÷ 55 °C
Interconnectivity no
Recommended
DESME A15

Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

PHOBOS AC A25

Irreversible electromechanical operator 230 V for swing gates weighing up to 400 kg and 2.5 m long.

RADIUS B LTA 230 R1

Flashing light with incorporated antenna for motors with power supply 230 V.

ALENA SW2
D113811 00004

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V single-phase 400W max each operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V...

ALENA SW2 120V
D113811 00003

Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors Application: control panel for one or two operators for swing gates Board power supply: 120V single-phase Operator power supply: 230 V single-phase, max. 400W per operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Control panel with dip switches and potentiometers for one or two 120V 400W+400W, operators for swing gates and industrial folding doors...

ALTAIR P
D113703 00002

Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 300W per operator Main features: removable terminal blocks, programming with display and built-in dual channel receiver Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for...

ARB PHOBOS 25
N733427 00001

Adjustable front mounting bracket, Phobos A 25

ARB PHOBOS 40
N733428 00001

Adjustable front mounting bracket, Phobos A 40

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
D730178

Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

Swinging gates
Electromechanical automation systems for swinging gates
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show
Phobos AC A
How to Choose the Right Swing Gate Operator
Show
Phobos AC A
Comment Choisir l'Opérateur Pour un Portail Battant
Show

An unexpected error occurred: please reload the page or try again later.