BOTTICELLI 800 U
Product code P915194 0000724 V operator for sectional garage doors with tractive force 80 kg and intensive use. Max door surface area 13 m². Opening speed 5 m/min.
PLUS
Built-in control unit with automatic learning of opening and closing force.
High-strength galvanised steel rail with ducts to facilitate the routing of the cables.
Encoder and exclusive D-Track force management system for safe installations in all conditions.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.
A single communication platform for all types of control units and receivers.
The innovative interconnectivity systems developed by Bft along with wireless connection solutions in the field of access point automation become integrated through the new U-link system communication protocol.
A technology designed and developed to operate using specific gateways for any type of physical media and communication protocol.
To fully facilitate installers in creating the system and in maintenance, Bft can offer solutions based on Bluetooth transmission systems in local and TCP/IP environments for remote connection.
U-Link ensures an absolutely stable standard, correct communication, as well as secure data protection thanks to two levels of encryption, offered by the data encryption system and password of the protocol and by the underlying communication system.
- U-Link is a technological platform that forms the heart of Bft products.
- U-link uses an open approach: by changing the B-Eba, Bft proprietary gateway, it is possible to adapt to many different communication languages.
- U-link is flexible: it can work with or without a network connection, depending on the B-Eba gateway installed.
- U-Link enables remote maintenance of the products thanks to two-way communication.
- U-link is scalable: an infinite number of objects can be added to a U-link network.
- U-Link allows the creation of groups of products: various B-Ebas can be grouped to allow individual or group control of the associated products.
U-link is an innovation that turns products into Bft solutions.
| Control unit | VENERE D |
| Nominal voltage | 24 V |
| Power input | 236 W |
| Max. door/gate weight | 80 kg |
| Door surface area | 13 m² |
| Type of limit switch | Encoder + mechanical stop for opening |
| Gate speed | 5 m/min |
| Slowdown | Yes |
| Locking | Mechanical |
| Release | Cord or steel cable |
| Impact reaction | D-Track |
| Frequency of use | intensive |
| Protection rating | IPX0 |
| Environmental conditions | -15 ÷ 60 °C |
| U-Link | Yes |
VENERE D
BIN CATENA 2900 SINT Cod. P115020 00001Chain rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm.Chain rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm.
BIN CATENA 3500 SINT Cod. P115020 00002Chain rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm.Chain rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm.
BIN CHAIN 2X1450 Cod. P115009 00005Chain rail divided into two halves for Botticelli, length 2900 mm, travel 2400 mm.Chain rail divided into two halves for Botticelli, length 2900 mm, travel 2400 mm.
BIN CHAIN 2X1750 Cod. P115009 00006Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.
BIN CATENA 2X1750 SINT Cod. P115021 00002Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.
BIN CINGHIA 2900 PIG FE Cod. P115022 00001Belt rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm.Belt rail for BOTTICELLI, length 2900 mm, useful travel 2400 mm.
BIN CINGHIA 3500 PIG FE Cod. P115022 00002Belt rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm.Belt rail for BOTTICELLI, length 3500 mm, useful travel 3000 mm.
BIN BELT 2X1450 Pig FE50 Cod. P115023 00001Belt rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length # {td-7563-80-3}, travel 2400 mm.Belt rail divided into two halves for Botticelli BT A 650-850 compatible with Botticelli 600-800, length # {td-7563-80-3}, travel 2400 mm.
BIN CINGHIA 2X1750 Pig FE Cod. P115023 00002Belt rail divided into two halves for BOTTICELLI, length 3500 mm, travel 3000 mm.Belt rail divided into two halves for BOTTICELLI, length 3500 mm, travel 3000 mm.
BIN120 CATENA 2900 Cod. P115010 00001Chain rail for EOS 120, length 2900 mm, useful travel 2400 mm.Chain rail for EOS 120, length 2900 mm, useful travel 2400 mm.
BIN120 CATENA 3500 Cod. P115010 00002Chain rail for EOS 120, length 3500 mm, useful travel 3000 mm.Chain rail for EOS 120, length 3500 mm, useful travel 3000 mm.
BIN120 CATENA 2X 1450 Cod. P115010 00003Chain rail divided into two halves for Botticelli, length 2900 mm, travel 2400 mm.Chain rail divided into two halves for Botticelli, length 2900 mm, travel 2400 mm.
BIN120 CATENA 2X 1750 Cod. P115010 00004Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.Chain rail divided into two halves for Botticelli, length 3500 mm, travel 3000 mm.
PBE Cod. N733391Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.Complete kit for extending the useful travel of the BOTTICELLI and EOS 120 chain rails by 1 m.
APT Cod. N999060Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling.Assembly for fitting BOTTICELLI, EOS 120 at over 30 cm from the ceiling.
TA BIN Cod. N999370Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs).Vibration damper plugs for EOS120 and BOTTICELLI, (pack of 4 plugs).
SM1 Cod. P115005External manual release for overhead garage door (1 operator).External manual release for overhead garage door (1 operator).
SET/S Cod. N733069External release for insulated sectional and overhead doors of thickness up to 50 mm.External release for insulated sectional and overhead doors of thickness up to 50 mm.
ST Cod. P115003Automatic bolt release for sectional doors.Automatic bolt release for sectional doors.
BRTS Cod. P115029Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U...
Triangular slide arm for overhead doors For BOTTICELLI SMART BT A 850-1250, BOTTICELLI B CRC 480, EOS 120, BOTTICELLI 800 U and EOS 120 U operators.
CB EOS Cod. P125006Set of backup batteries for VENERE D.Set of backup batteries for VENERE D.
