MAXIMA ULTRA 35

Professional electromechanical barriers


Professional electromechanical barriers

Range of professional 230 Vac electromechanical barriers with speed variator and three-phase induction motor for high frequency of use. Designed and developed to operate in a wide variety of conditions such as large car parks, motorway tollgates with frequent reversing, industrial installations. Possibility of setting the useful passage from electronic control unit. Mechanical movement with crank to make the bar operate smoothly, also managing slowdowns in opening and closing. Equipped with U-Link protocol, they allow integration in Parking Management or Building Management systems

Technologies
  • Rolling Code
  • Inverter
  • Inverter with three-phase induction motor
  • Reduction unit in oil bath
  • Crank handle system
  • Three-phase induction motor
  • Inductive encoder
  • For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

  • Motor rotation constantly under control The inverter is an electronic device allowing motor rotation speed to be controlled at any moment, ensuring safety and reliability of the installation, and even extending its life. This is because the inverter reduces the stresses on mechanical parts, subjecting them to less stress. The system also allows management of automation opening and closing times.

  • Allows precise control and management of bar/boom speed in a specific range of Bft barriers and also provides excellent dynamic performance in acceleration and slowdown, ensuring extreme quietness.

  • The device included in a specific range of Bft barriers, offering great durability in being maintenance free; it ensures extreme quietness and irreversibility of movement.

  • Together with irreversibility of the reduction unit, this device included in a specific range Bft barriers provides intrinsic anti-vandal protection, preventing unauthorised opening of the gate.

  • This device, included in a specific range of Bft barriers, allows the motor to be maintenance-free and offers extreme reliability and quietness. It can also be used in hazardous areas, as it does not produce sparks.

  • A contactless high-resolution device for detecting obstacles. It ensures rapid reversing of motion and improves smoothness of overall movement during acceleration and slowdown.

Products list
Professional electromechanical barriers
MAXIMA ULTRA 35 SM

230 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 1.7 to 5 m. Opening time from 0.7 to 3 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for...

Professional electromechanical barriers
MAXIMA ULTRA 35 SM - RAL

230 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 1.7 to 5 m. Opening time from 0.7 to 3 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for...

Professional electromechanical barriers
MAXIMA ULTRA 35 SM + ASS SPRING

230 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 1.7 to 5 m. Opening time from 0.7 to 3 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for...

Professional electromechanical barriers
MAXIMA ULTRA 35 SM + ASS SPRING RAL

230 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 1.7 to 5 m. Opening time from 0.7 to 3 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for...

Professional electromechanical barriers
MAXIMA ULTRA 35 SM 115V NPB NO SPRING

120 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 1.7 to 5 m. Opening time from 0.7 to 3 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for...

Professional electromechanical barriers
MAXIMA ULTRA 35 SM 115V NPB NO SPRING RAL

120 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 1.7 to 5 m. Opening time from 0.7 to 3 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for...

Professional electromechanical barriers
MAXIMA ULTRA 35 SM ST. STEEL (STAINLESS)

230 V Electromechanical barrier with asynchronous three-phase motor and inverter, for from 1.7 to 5 m. Opening time from 0.7 to 3 s with Yes deceleration. Maximum barrier length: 5 m. Suitable for...

Accessories

Recommended accessories.

KIT ATM LIGHT 3 R/G 2W
Cod. P120077 00001

Red-green LED lights kit for fitting on ATM bars up to 3m.

KIT ATM LIGHT 5 R/G 2W
Cod. P120077 00002

Red-green LED lights kit for fitting on ATM bars up to 5m.

MLR2.5
Cod. P120056

Red spring - MAXIMA Utra 35 Ref. spring table

MLB3
Cod. P120057

Blue spring - MAXIMA Ultra 35 Ref. spring table

MLV5
Cod. P120058

Green spring - MAXIMA Ultra 35 Ref. spring table

ATM25
Cod. P120102 00001

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ADJ-FOOT
Cod. P120093

Suspended cushioned telescopic supporting foot for BOOM PS booms.

OMEGA ATM U35
Cod. P120062 00001

Single clamping for ATM bar for MAXIMA ULTRA 35. Bar not included.

OMEGA ATM FRA U35
Cod. P120071

Single clamping for ATM bar for Maxima Ultra 35

PCA ATM 3
Cod. P120053 00001

Rubber protection (red) for fitting on bar L = 3 m max.

PCA ATM 5
Cod. P120053 00002

Rubber protection (red) for fitting on bar L = 5 m max.

PCA ATM 8
Cod. P120053 00003

Protection rubber (black) for fitting on bars from L = 6÷8 m.

ALLU 2 MAXIMA ULTRA
Cod. P120075

Power supply for ATM LIGHT Kit on Maxima Ultra

TP MAXIMA ULTRA
Cod. P120076

Thermal probe for Maxima Ultra barriers

EBB KIT ATML
Cod. P120079

Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

FAF UNI R
Cod. P120080

Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

GA ATM
Cod. P120050

Adjustable suspended foot, powder coated cataphoresis treated.

RST ATM
Cod. P120049

Aluminium rack. Price for 3 metres. Suspended foot not included. Compatible with ATML and ATM model bars.

SRV DIN
Cod. P120032

Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block

Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...

FCS MAXIMA 5
Cod. P120033

2 additional limit switches for MAXIMA 30/MAXIMA ULTRA 35

ATM25
Cod. P120111 00001

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=2.5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM30
Cod. P120102 00002

Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=3 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM40
Cod. P120102 00003

Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging

Aluminium bar L=4 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

ATM50
Cod. P120102 00004

Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new polystyrene packaging.

Aluminium bar L=5 m with drop-shaped profile and red reflectors. Lights and rubber protection not included. Completely protected by new...

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.