Operator 400 V for sliding gates weighing up to 3500 kg. Leaf speed 10 m/min. U-link and limit switch Electromechanical. Three-phase power supply 400 V. Fixing base included.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
|Control unit||SIRIO CBB|
|Board power supply||400 V|
|Supply voltage||400 V|
|Power consumption||550 W|
|Max. door/gate weight||3500 kg|
|Gate speed||10 m/min|
|Type of limit switch||Electromechanical|
|Impact reaction||Sensitive edge|
|Frequency of use||very intensive|
|Environmental conditions||-15 ÷ 50 °C|
B EBA RS 485 LINK
Expansion board for connection of central units with serial controls management
RADIUS LED AC A R1
Cod. D114093 00002
Flashing light with incorporated antenna for motors with power supply 230 V.
RADIUS LED AC A R0
Cod. D114094 00002
Flashing light without incorporated antenna for motors with power supply 230 V.
Pair of photocells adjustable 180 ° horizontally. Range 20m. Power supply 12 – 33Vac / 15 – 35Vdc
galvanized steel rack, 6-module, cross-section 30 x 30 mm, length 2 m, welding Max. load capacity 4000 kg.
Adjustable anchor base for SP3500, supplied separately
Safety microswitch for SP3500
Two-channel receiver with plug 433 MHz rolling code. 128 position memory. 24 Vac power supply.
CLONIX 2 2048
Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory 24 Vdc Vac power supply.