Operator for overhead garage doors of maximum surface area 8 m² and Semi intensive use. Cycle time 17-20 s, IP20
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.
|Nominal voltage||24 V|
|Power consumption||40 W|
|Cycle time||17-20 s|
|Door surface area||8 m²|
|Type of limit switch||Electromechanical|
|Frequency of use||Semi intensive|
|Environmental conditions||-15 ÷ 60 °C|
VEGA QUADRO QSG
Cod. D113836 00002
Card power supply: 230 V single-phase Operators power supply: 24Vdc 168W max each operator U-Link technology Main characteristics: removable terminal blocks, programming with display and incorporated dual channel receiver, anti-crushing, slowdown during opening and closing and electronic self-learning Main functions: automatic re-closing, fast closing, pulse blocking, blocking hold Compatibility: HYDRA, HYDRA R Version for external panel, not compatible with operators already equipped with card on board motor
Card power supply: 230 V single-phase Operators power supply: 24Vdc 168W max each operator U-Link technology Main characteristics: removable...
Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor
Battery adapter wiring kit necessary for PHEBE BT A with built-in control unit and for BBT BAT
Set of backup batteries for THALIA and THALIA P
Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT
Short welding base for PHEBE series operators (L 578 mm)
Long welding base for PHEBE series operators (L 1600 mm)
2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators
2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators
Straight telescopic arms for the installation of PHEBE series operators on overhead door
Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm
Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm
Curved telescopic arms for the installation of PHEBE series operators on overhead door
Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors
External manual release for overhead garage door (1 operator)
External manual release for overhead garage door (2 operators)
RADIUS LED BT A R1
Cod. D114093 00003
Flashing light with incorporated antenna for motors with power supply 24 V.
RADIUS LED BT A R0
Cod. D114094 00003
Flashing light without incorporated antenna for motors with power supply 24 V.
RADIUS LED BT A R1 W
Cod. D114168 00003
Flashing light with built-in antenna for motors with a 24 V power supply. White flashing light.
Pair of photocells adjustable 180 ° horizontally. Range 20m. Power supply 12 – 33Vac / 15 – 35Vdc