IGEA KIT FRA

Product code R935221 00002

Complete kit 230 V for swing gates up to 250 kg in weight and 2.5 m in length.

Main features
  • Aluminium structure with high-resistance paint treatment.

  • Built-in, adjustable, single-cable electromechanical limit switch system.

  • Control unit with programming display, automatic setting menu, simplified programming and virtual encoder.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit RIGEL 6
Board power supply 230 V
Motor voltage 230 V
Power consumption 300 W
Max. width of door/gate wing 2.5 m
Max. weight of door/gate wing 250 kg
Maximum angle 125 °
Cycle time 15 s
Type of limit switch Electromechanical
Slowdown no
Locking Mechanical
Release Knob operated with personal key
Impact reaction Electronic clutch
Frequency of use intensive
Protection rating IP44
Environmental conditions -15 ÷ 60 °C
Interconnectivity no
RIGEL 6 220-230V 50/60HZ

Universal control panel with display for one or two 230V - 650+650W operators

Automatic gates photocells
DESME A15

Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

Warning lights for gates, 24volt or 230 volt
RADIUS B LTA 230 R1

Flashing light with incorporated antenna for motors with power supply 230 V.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

Motor for swing gates up to 250 kg with articulated arm for installations with very large pillars
IGEA

Electromechanical operator 230 V for swing gates up to 250 kg in weight and 2.5 m in length.

RADIUS LED AC A R1
Cod. D114093 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R0
Cod. D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
Cod. P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RCA
Cod. N733421

Lever release with steel cable, length 3.5 m. Compatible with BOX.

RCAL
Cod. N733422

Lever release with steel cable, length 7 m. Compatible with BOX.

LRV
Cod. P135005

Short articulated arms for IGEA and IGEA BT

BOX
Cod. N574039

Wall cabinet for release with steel cable and electric control; cable not included

ALENA SW2
Cod. D113811 00004

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V single-phase 400W max each operator Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening. Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operators power supply: 230V...

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.