Operator 24 V for sliding gates up to 360 kg in weight. Leaf speed 16 m/min.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.
|Board power supply||230 V|
|Supply voltage||24 V|
|Power consumption||70 W|
|Max. door/gate weight||360 kg|
|Gate speed||16 m/min|
|Type of limit switch||Electromechanical|
|Release||Lever-operated with personal key|
|Frequency of use||intensive|
|Environmental conditions||-20 ÷ 55 °C|
RADIUS LED BT A R1
Cod. D114093 00003
Flashing light with incorporated antenna for motors with power supply 24 V.
RADIUS LED BT A R1 W
Cod. D114168 00003
Flashing light with built-in antenna for motors with a 24 V power supply. White flashing light.
RADIUS LED BT A R0
Cod. D114094 00003
Flashing light without incorporated antenna for motors with power supply 24 V.
Pair of photocells adjustable 180 ° horizontally. Range 20m. Power supply 12 – 33Vac / 15 – 35Vdc
plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots Max. load capacity 600 kg.
steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports Max. load capacity 1000 kg.
steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports Max. load capacity 800 kg.
Base plate for DEIMOS series (supplied with operator)
Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.