Product code P970099

Motorised column for automatic chain barrier 24 V for intensive use, suitable for delimiting access zones of residential and industrial areas and small car parks, covering access points up to 16 m.


Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner

For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.

The thrust required to operate safely.
A smart torque management system based on the microprocessor technology of BFT control units.
Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
D-Track also facilitates the installer in providing for the certifications required by law.
Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

A precise, safe and reliable technology.
Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
The efficiency of the technology is a guarantee of the product's reliability.

technical design TWIN
Control unit LOG-BC with receiver
Motor power supply 24 V
Opening or closing time 10 s
Safety Armoured padlock with numbered key
Case treatment Cataphoresis
Chain Ø 8 (PRV-CHN 10). / Ø 4.5(PRV-CHN 16) mm
Useful passage 16 m
Type of limit switch Electronic
Impact reaction Electronic torque limiter
Frequency of use intensive
Environmental conditions -20 ÷ 60 °C
U-Link no

PRV-CHN 10 Cod. P800077Chain for access points up to 10 m, wire Ø8 mm. Armoured lock not included.Chain for access points up to 10 m, wire Ø8 mm. Armoured lock not included.

PRV-CHN 16 Cod. P800078Chain for access points up to 16 m, wire Ø4.5 mm. Armoured lock not included.Chain for access points up to 16 m, wire Ø4.5 mm. Armoured lock not included.

TWIN CHN PADLOCK Cod. P800107Armoured lock for Twin chain closing.Armoured lock for Twin chain closing.

CHN-DRIVE 1 Cod. P800088Above-ground guide for holding chain (2 m).Above-ground guide for holding chain (2 m).

CHN-DRIVE 2 Cod. P800079Pavement guide (2 metres) for housing chain.Pavement guide (2 metres) for housing chain.

BBV TWIN Cod. P120068TWIN backup batteries.TWIN backup batteries.

RME 1 BT Cod. P11127424 V single channel metal object detector with installation base.24 V single channel metal object detector with installation base.

RME 2 Cod. P111001 00003230 V dual channel metal object detector with installation base.230 V dual channel metal object detector with installation base.

SPIRA 2X1 Cod. D110926 00001Magnetic loop 2 x 1 m.Magnetic loop 2 x 1 m.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.