Kit for swing gates up to 2.3 m, 300 kg in weight. Hydraulic operators with useful travel 270 mm, max angle 123 °, locking Hydraulic closing and release Triangle key. Cycle time 23 s. Power input 250 W.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
|Control unit||RIGEL 6|
|Motor voltage||230 V|
|Power consumption||250 W|
|Max. width of door/gate wing||2.3 m|
|Max. weight of door/gate wing||300 kg|
|Useful rod stroke||270 mm|
|Maximum angle||123 °|
|Cycle time||23 s|
|Type of limit switch||work time|
|Impact reaction||Hydraulic clutch|
|Frequency of use||very intensive|
|Environmental conditions||-10 ÷ 60 °C|
Hydraulic operator 230 V for hinged leaves up to 2.3 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 23 s and maximum opening angle 123 °. Locking system: Hydraulic closing
RADIUS B LTA 230 R1
Flashing light with incorporated antenna for motors with power supply 230 V.
MITTO B RCB04 R1
Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A