ICARO SMART AC A2000 V SQ

Product code P925237 00003

Operator 230 V for sliding gates up to 1000 kg in weight. Leaf speed 12 m/min.

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

A contactless high-resolution device for detecting obstacles. It ensures rapid reversing of motion and improves smoothness of overall movement during acceleration and slowdown.

The device included in a specific range of Bft barriers, offering great durability in being maintenance free; it ensures extreme quietness and irreversibility of movement.

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

technical design
Control unit -
Board power supply - V
Supply voltage 230 V
Power consumption 750 W
Max. door/gate weight 1000 kg
Gate panel speed 12 m/min
Type of limit switch Electromechanical
Pinion module 4
Slowdown Yes
Locking Mechanical
Release Lever-operated with personal key
Impact reaction Mechanical clutch + encoder
Frequency of use very intensive
Protection rating IP24
Environmental conditions -20 ÷ 55 °C
Interconnectivity Yes
CP
Cod. D221073

plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots attachment Max. load capacity 600 kg.

CVZ-S
Cod. N999320

steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 800 kg.

CVZ
Cod. D571053

steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 1000 kg.

CFZ
Cod. D571054

galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding attachment Max. load capacity 2000 kg.

RADIUS LED AC A R1
Cod. D114093 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R0
Cod. D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
Cod. P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

SFI
Cod. N999156

Base plate for ARES and ICARO (supplied with operator)

THEKE B PRA 01
Cod. P125018

Metal protection box for ARES and ICARO series sliding operators

B EBA RS 485 LINK
Cod. P111468

Expansion board for connection of central units with serial controls management

Fast sliding gates
Fast electromechanical automation for sliding gates
Download
Sliding Gates
Sliding gates automation systems
Download
Icaro VELOCE
ICARO VELOCE SMART AC A 1000
Show
Icaro Ultra AC A 2000
Icaro Ultra AC A 2000 sliding gate operator
Show

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.