Product code P935105 00001

Hydraulic operator with 24 V for hinged wings up to 2 m. 300 kg in weight and use very intensive. Manoeuvre time 14 s.

Main features
  • Control unit with display: for easy scenario programming.
    U-Link: full interconnectivity with other devices via Bluetooth, RS-485, TCP/IP.

  • Selectable block system: the operators can be converted to reversible, with opening block, closing block or double block. All this by simply turning a key.

  • New magnetic limit switch: together with D-Track technology, offers extreme precision of maneuver and positioning. Double sensor system to define in detail end of the maneuver slowdowns. High reliability against dust, water and ice.


Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

technical design
Control unit THALIA P
Board power supply 230 V
Motor voltage 24 V
Power consumption 90 W
Max. width of door/gate wing 2 m
Max. weight of door/gate wing 300 kg
Useful rod stroke 270 mm
Maximum angle 110 °
Cycle time 14 s
Type of limit switch Magnetic
Slowdown Yes
Locking Selectable in opening/closing
Release Triangle key
Impact reaction D-Track
Frequency of use very intensive
Protection rating IP55
Environmental conditions -20 ÷ 60 °C
U-Link no
Cod. D113745 00002

Application: control panel with display for one or two 24V electromechanical operators for swing gates Card power supply: 230 V single-phase Operators power supply: 24Vdc 180W max each operator Main features: new standard colour removable terminal blocks, simplified scenario-based programming with display and integrated dual-channel receiver, D-Track anti-crushing system, slowdown during opening and closing and electronic self-learning. Main functions: automatic re-closing, fast closing, partial opening, deadman feature Compatibility: LIBRA C MA, LIBRA, LIBRA R, LIBRA MA R

Application: control panel with display for one or two 24V electromechanical operators for swing gates Card power supply: 230 V single-phase...

Cod. N733426

Adjustable front and rear bracket for LUX operator

Cod. N733474

Adjustable front and rear bracket for LUX G operator

Cod. D610180

Triangular release key l=52 mm

Cod. N999443

Anchor plate for welding the mountings to masonry pillars for LUX BT, GIUNO BT A

Cod. P125020

Set of backup batteries for THALIA and THALIA P

Cod. N999417

1603 cable for LUX BT/GIUNO BT/IGEA - skein of 100 m

Cod. P111782

Pair of photocells adjustable 180 ° horizontally. Range 20m. Power supply 12 – 33Vac / 15 – 35Vdc

Cod. D114094 00003

Flashing light without incorporated antenna for motors with power supply 24 V.

Cod. D114093 00003

Flashing light with incorporated antenna for motors with power supply 24 V.

Cod. D114168 00003

Flashing light with built-in antenna for motors with a 24 V power supply. White flashing light.

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

An unexpected error occurred: please reload the page or try again later.