Motors for sectional garage doors for intensive use

ARGO G

Product code P925206 00002
  • DIMENSIONAL DIAGRAM
technical design ARGO
Technologies
  • The new coding system for direct cloning of remote controls.
    Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
    In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
    Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

  • A precise, safe and reliable technology.
    Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening.
    Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles.
    The efficiency of the technology is a guarantee of the product's reliability.

  • The thrust required to operate safely.
    A smart torque management system based on the microprocessor technology of BFT control units.
    Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
    D-Track also facilitates the installer in providing for the certifications required by law.
    Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
    BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
    A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
    The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

Operator for sectional doors of surface area up to 35 m² and very intensive use.

PLUS
  • Control unit with on-board programming display and D-Track torque, speed and position management and control system. Incorporated dual channel radio receiver.

  • Limit switch based on absolute encoder technology, guaranteeing maximum reliability and stopping precision.

  • Exclusive encoder position reset knob for fast, safe installations.

Built-in control panel
VENERE D ARGO
Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
Technical Data
Type of limit switch Absolute encoder
Impact reaction D-track
Slowdown Yes
U-Link No
Control unit Venere d argo g
Power input 240 w
Locking Mechanical
Release Steel cable
Frequency of use Very intensive
Protection rating Ip40
Environmental conditions -15 ÷ 55 °c
Door surface area 35 m²
Nominal voltage 24 v
Accessories

Recommended accessories.

  • PIG 30/ULISSE S Cod. N733337 Z30 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts. Z30 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.

  • BOX Cod. N574039 Wall safe for unlocking with steel cable and electrical control; cable not included. Wall safe for unlocking with steel cable and electrical control; cable not included.

  • PIG 18/ULISSE S Cod. N733339 Z18 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts. Z18 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.

  • RCAL Cod. N733422 Lever release for ARGO with steel cable, length 7 m. Lever release for ARGO with steel cable, length 7 m.

  • BT BAT Cod. P125005 Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO. Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO.

  • PIG 14/ULISSE S Cod. N733336 Z14 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts. Z14 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.

  • CKK Cod. N999592 Pack of mounting tabs for ARGO and ARGO G. Pack of mounting tabs for ARGO and ARGO G.

  • RCA Cod. N733421 Lever release for ARGO with steel cable, length 3.5 m. Lever release for ARGO with steel cable, length 3.5 m.

  • COR 40 Cod. N733149 Z40 gear kit complete with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts. Z40 gear kit complete with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts.

  • FALCON Cod. P111407 Industrial presence sensor installable up to 7 m. Industrial presence sensor installable up to 7 m.

  • PIG 12/ULISSE S Cod. N733338 Z12 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts. Z12 pinion gear for industrial sectional doors, for 1 " (25.4 mm) shafts.

  • COR 30 Cod. N733148 Z30 gear kit complete with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts. Z30 gear kit complete with accessories for industrial sectional doors, for 1 " (25.4 mm) shafts.

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.