PHOBOS AC KIT A25 FRA

Product code R935304 00003

Complete kit 230 V for swing gates up to 400 kg in weight and 2.5 m in length.

Main features
  • Magnetic pin: an exclusive feature of Bft operators enabling quicker installation steps, making them easier and always ensuring correct rear locking of the operator

Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit RIGEL 6. ALENA SW2
Board power supply 230 V
Motor voltage 230 V
Power consumption 210 W
Max. width of door/gate wing 2.5 m
Max. weight of door/gate wing 400 kg
Useful rod stroke 350 mm
Maximum angle 120 °
Cycle time 14 s
Type of limit switch work time
Slowdown Yes
Locking Mechanical
Release Personal key
Impact reaction Electronic clutch
Frequency of use Semi intensive
Protection rating IPX4
Environmental conditions -20 ÷ 55 °C
Interconnectivity no
Recommended
ALENA ACL2
Compatible
RIGEL 5
ALENA ACL2

ALENA ACL2 control panel

Automatic gates photocells
DESME A15

Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.

Pistons and kit for automatic swing gates for residential use
PHOBOS AC A25

Irreversible electromechanical operator 230 V for swing gates weighing up to 400 kg and 2.5 m long.

Warning lights for gates, 24volt or 230 volt
RADIUS B LTA 230 R1

Flashing light with incorporated antenna for motors with power supply 230 V.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R1

Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

ALTAIR P
Cod. D113703 00002

Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 300W per operator Main features: removable terminal blocks, programming with display and built-in dual channel receiver Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES

Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for...

ARB PHOBOS N
Cod. N733427

Front and rear adjustable bracket for PHOBOS operator

ARB PHOBOS N L
Cod. N733428

Front and rear adjustable bracket for PHOBOS operator

RADIUS LED AC A R1
Cod. D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

COMPACTA A20-180
Cod. P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

Swinging gates
Electromechanical automation systems for swinging gates
Download
Phobos AC A
How to Choose the Right Swing Gate Operator
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

An unexpected error occurred: please reload the page or try again later.