XPASS B 330/1200 BODY LI STAINLESS STEEL 316

Product code P970105 00302

Hydraulic anti-terrorism bollard K12. Shaft height 1200 mm, diameter 330 mm and LED light cap. In the event of a power failure, the shaft does not drop spontaneously. Hydraulic control unit not included, foundation box included.

technical design
Manual cycle reversible by means of mechanical key with no power
Control unit PERSEO CBE
Rod treatment AISI 316L stainless steel
Frequency of use 2000 Op/gg
Power supply 230 V
Raise time max. 6.3 seconds (1.5 with HYDRAULIC UNIT + EFO)
Protection rating IP67
Rod diameter 330 mm
Rod height 1200 mm
Lower time 4 s
Environmental conditions -40 ÷ 60 °C
Rod thickness 25 mm
Break-in proof 2100000 J
Interconnectivity no
Antiterrorism: reference standard IWA14-1:2013 V/7200[N3C]/80/90 single bollard installation
Type of limit switch REED magnetic sensor
TOTEM UNIT
P800116

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. Painted stainless steel version, RAL 7015.

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included....

TOTEM UNIT - RAL
P800116 00102

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL colour as requested.

Base module for TOTEM. Can be used as either the lower or upper module. Used to install the control accessories. Top cover not included. RAL...

TLIGHTS
P800117

Traffic lights and top covering for totem

TLIGHTS - RAL
P800117 00102

Traffic lights and upper cover for totem unit. RAL colour to order

TCAP
P800108

Top covering without lights for elements of Totem.

TCAP - RAL
P800108 00102

Top covering without lights for elements of Totem. RAL colour as requested.

TPF
P800040

Foundation and anchor plate for totem

MANUAL PUMP 2LT
P800111

2 litre manual pump

TAP FOR MANUAL PUMP
P800112

Joint for two-litre manual pump.

LOOP DETECTOR PRO 230V
P111786

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

SPC3
D121619

Open stop close button panel.

RME 2
P111001 00003

230 V dual channel metal object detector with installation base

SPIRA 2X1
D110926 00001

Magnetic loop 2 x 1 m

XPASS 800 ALARM
P800103

Anti-vandalism alarm for XPASS 275/800

ACOUSTIC DETECTOR
D113705

Adjustable acoustic detector for sirens

BOLLARD CABLE EXT25
P800114

Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

BOLLARD CABLE EXT50
P800115

Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)

BAT KIT EFO
P800113

Reflector and support for wall mounting and mounting on CC post for CELLULA RFL

An unexpected error occurred: please reload the page or try again later.