MAXIMA ULTRA 36 INOX 230V

Product code P940093 00202

230V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Stainless steel barrier body.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
technical design
Opening or closing time from 0.7 to 3.9 s
Control unit CSB-XT
Motor type Three-phase asynchronous
Gear unit type In oil bath
Inverter Yes
Slowdown Yes
Impact reaction encoder
Locking Mechanical
Release Inside the structure
Frequency of use Continuous
MCBF (Mean Cycles Between Failures) 7000000 Op
Environmental conditions -40 ÷ 60 °C
Protection rating IP55
Interconnectivity no
Clear opening from 2 to 6 ft
Crown MAXIMA U36
P940095 00000

Cap without lights for Maxima Ultra 36.

Crown RGB MAXIMA U36
P940095 00003

Cap with RGB lights for Maxima Ultra 36. Functions: flashing, traffic light, diagnostics.

Crown MAXIMA U36 INOX
P940095 00200

Cap without lights for Maxima Ultra 36 INOX.

Crown RGB MAXIMA U36 INOX
P940095 00203

Cap with RGB lights for Maxima Ultra 36 Stainless Steel. Functions: flashing, traffic light, diagnostics.

Crown MAXIMA U36 RAL
P940095 00100

Cap without lights for Maxima Ultra 36. Custom RAL

Crown RGB MAXIMA U36 RAL
P940095 00103

Cap with RGB lights for Maxima Ultra 36. Custom RAL. Functions: flashing, traffic light, diagnostics.

DIMA PRO36
P120088

Foundation template and clamps for installation of Maxima Ultra 36 barriers.

BOOM PS30
P120087 00001

Aluminium bar, opening L = 3 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS40
P120087 00002

Aluminium bar, opening L = 4 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS50
P120087 00003

Aluminium bar, opening L = 5 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

BOOM PS60
P120087 00004

Aluminium bar, opening L = 6 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

OMEGA PS MAXIMA U36
P120084 00000

Single lock for protective finger trapping casing and screws for MAXIMA ULTRA 36. BOOM PS bar excluded.

OMEGA FRA PS MAXIMA U36
P120094 00000

Resettable impact protection connector (manual) for Maxima Ultra 36 barrier. BOOM PS bar excluded.

LIGHT PS 30-B
P120089 10001

High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 3 metres long. Power supply unit excluded.

LIGHT PS 40-B
P120089 10002

High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 4 metres long. Power supply unit excluded.

LIGHT PS 50-B
P120089 10003

High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 5 metres long. Power supply unit excluded.

LIGHT PS 60-B
P120089 10004

High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 6 metres long. Power supply unit excluded.

ALLU 2 MAXIMA ULTRA
P120075

Power supply for ATM LIGHT Kit on Maxima Ultra

HYPHEN PS
P120091

Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m with or without accessories.

Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m...

BTM-SKIRT
P120085

Lower skirt for BOOM PS booms. Module length L = 2 m.

FULL-SKIRT
P120086

Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module to the barrier body.

Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module...

BRACKET SKIRT
P120095

Connection bracket between barrier body and simple (BTM SKIRT) or double (FULL SKIRT) aluminium rack.

ADJ-FOOT
P120093

Suspended cushioned telescopic supporting foot for BOOM PS booms.

KIT ART90 PS
P120092

Kit for 90° articulated bar. Excludes bar, bar connector, LIGHT PS lighting. Compatible with BOOM PS booms.

FAF UNI R
P120080

Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

EBB KIT ATML
P120079

Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

HYPHEN PS PRO
P120108

Internal reinforcement for BOOM PS booms L=175 cm. Increases the rigidity of the bar. Recommended for use in particularly windy areas.

BARRIERS
Complete range road barriers
Show
Maxima Ultra 36
Maxima ultra 36
Show

An unexpected error occurred: please reload the page or try again later.