ARES VELOCE SMART BT KIT A500

Product code R925340 00001

Complete kit 24 V for sliding gates weighing up to 500 kg. Speed without load 25 m/min.

Main features
  • Speed: The fast opening of the ARES SMART BT reduces waiting times and allowing quicker access, reducing the risk of an accident.

  • Security: The fast operating speed means that the ARES VELOCE SMART BT A closes quickly, reducing the risk of entry by unauthorised people.

  • U-Link: The ARES VELOCE SMART BT operator is compatible with the U-Link communication protocol, through the integrated MERAK SV 24 V control panel.

  • D-Track: An intelligent torque management system which updates the level of torque required to perform the operation, allowing it work at the optimum level regardless of weather conditions, temperature or the degree of wear and tear on the device.

  • Personalised key: The lever release makes it easy to release the motor and the personalised key is unique, providing increased security.

  • Screws on the front: By putting the fastening screws on the front of the casing, installation and maintenance are easier and more convenient, even in confined spaces.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit MERAK BT A V
Board power supply 230 V
Locking Mechanical
Manual cycle Mechanical release with lever
Power consumption 400 W
Pinion module 4 mm (25 teeth)
Protection rating IP24
Environmental conditions -20 ÷ 55 °C
Interconnectivity Yes
Impact reaction 8K2 safety edge (not supplied)
Speed without load ---
Speed with resistance force of 80N 22 m/min
Max torque 20 Nm
Frequency of use intensive
Max. door/gate weight 500 kg
Slowdown Yes
Motor voltage 24 V
ARES VELOCE SMART BT A500

24 V operator for sliding gates weighing up to 500 kg. Speed without load 25 m/min.

Warning lights for gates, 24volt or 230 volt
RADIUS LED BT A R1 W

Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

Automatic gates photocells
COMPACTA A20-180

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

433 MHz rolling code remotes for automatic gates, garage doors and other automated devices
MITTO B RCB04 R3 4CH 100PZ

Transmitter 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A. Pack of 100pcs numbered for block memorisation.

CFZ
D571054

galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding attachment Max. load capacity 2000 kg.

SFI
N999156

Base plate for ARES and ICARO (supplied with operator)

THEKE B PRA 01
P125018

Metal protection box for ARES and ICARO series sliding operators

B EBA RS 485 LINK
P111468

Expansion board for connection of central units with serial controls management

SL BAT2
P125035

Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

XL-CP99A36/KT/2000/8K/5
R920110

Kit for 8k2 resistive safety edges, length 2 metres, with 99 mm-high EPDM rubber strip, aluminium section, 2 contact terminals, 2 caps, 1 x 8.2 kOhm resistance connector and connection cable.

Kit for 8k2 resistive safety edges, length 2 metres, with 99 mm-high EPDM rubber strip, aluminium section, 2 contact terminals, 2 caps, 1 x...

KIT WIRELSSBAND 2.R
R920111

Wireless transmission system for resistive safety edges comprising transmitter and receiver.

TX WIRELESSBAND 2.R
P125050

Wireless transmitter for resistive safety edges.

RADIUS LED BT A R1
D114093 00003

Flashing light with incorporated antenna for motors with 24 V power supply.

RADIUS LED BT A R1 W
D114168 00003

Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

RADIUS LED BT A R0
D114094 00003

Flashing light without incorporated antenna for motors with 24 V power supply.

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

Ares VELOCE
ARES VELOCE SMART BT A 500 24V
Show

An unexpected error occurred: please reload the page or try again later.