SUB BT

Product code P930123 00001

Low voltage, in-ground irreversible hydraulic operator for hinged leaves up to 2.5 m. weight 800 kg.

Main features
  • Control unit with programming display and new, simplified scenario-based programming

  • Fully adjustable mechanical stops inside the operator

  • The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
Technologies

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

technical design
Control unit THALIA P
Board power supply 230 V
Motor voltage 24 V
Power consumption 300 W
Max. width of door/gate wing 2.5 m
Max. weight of door/gate wing 800 kg
Maximum angle 120 °
Cycle time 13 s
Slowdown Yes
Locking Open/close hydraulics
Release Lever or lever with personalised key
Impact reaction D-Track
Frequency of use very intensive
Protection rating IP67
Environmental conditions -20 ÷ 60 °C
Interconnectivity no
Compatible
THALIA
RADIUS LED BT A R0
D114094 00003

Flashing light without incorporated antenna for motors with 24 V power supply.

RADIUS LED BT A R1 W
D114168 00003

Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

FCS BT
N733480 00001

Foundation box for SUB BT series operators

SCP
N733502

Release for ELI AC A, ELI BT A and SUB BT with personalized key.

Swinging gates
Hydraulic automation systems for swinging gates
Show
Bft Easy Set
Installing automation for a swing gate has never been easier!
Show

An unexpected error occurred: please reload the page or try again later.