ORO

Product code P935059 00001
Hydraulic motors and kits for swing gates

Irreversible hydraulic operator for hinged leaves up to 1.8 m and 180 kg in weight, duty Semi intensive. Manoeuvre time 20 s.

Hydraulic motors and kits for swing gates

Main features

All the reliability and power of hydraulics in an extremely small-size, compact unit.

In the ORO version, the brass release valve allows the gate to be opened manually in the event of a power cut, and in the ORO E version it simplifies the manual cycle.

Technologies

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Data sheet

technical design
Control unit RIGEL 6
Board power supply 230 V
Motor voltage 230 V
Power consumption 240 W
Max. width of door/gate wing 1.8 m
Max. weight of door/gate wing 180 kg
Useful rod stroke 250 mm
Maximum angle 112 °
Cycle time 20 s
Type of limit switch work time
Slowdown no
Locking Hydraulic closing
Release Triangle key
Impact reaction Hydraulic clutch
Frequency of use Semi intensive
Protection rating IP55
Environmental conditions -10 ÷ 60 °C
Interconnectivity no

Control panels

  • Compatible

Universal control panel with potentiometers for one 230V/500W single-phase operator

  • Compatible

Universal control panel with display for one or two 230V - 650+650W operators

Commercial documents

Swinging gates
Hydraulic automation systems for swinging gates
Show

Recommended accessories

ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ALPHA SD
D113680 00002

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide and swing gates, roll-up gates and overhead doors Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 500 W Main features: removable terminal blocks, settings controlled by potentiometers, LED-based fault reporting and incorporated dual channel receiver Main functions: fast closing, pulse blocking, gate open indicator light Compatibility: MIZAR

Universal control panel with potentiometers for one 230V/500W single-phase operator Application: control panel for one operator for slide...

ARB ORO - LUX
N733424 00001

Adjustable front mounting bracket for ORO and LUX

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
D730178

Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

NAT
N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

CLS
D610180

Triangular release key l=52 mm

COMPACTA A20-180
P111782

Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

Do you need more information?

Get in touch with us, you will receive our support as soon as possible.

An unexpected error occurred: please reload the page or try again later.