LUX RSN2

Product code P935044 00002

Hydraulic operator 230 V for hinged leaves up to 2.2 m and 300 kg in weight. Useful travel 270 mm, manoeuvre time 17 s and maximum opening angle 123 °. Locking system: Solenoid Lock

Main features
  • All-aluminium structure with high-resistance anodising treatment.

  • The by-pass valves, in the 230V versions, allow the exact setting of the torque separately and independently for opening and closing.

  • The slowdown during closing (R versions) guarantees silent, smooth movements on even the biggest gates. Also, the adjustment screw makes it possible to adapt the slowdown intensity to needs of each situation.

Recommendation

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Report a suspicious product or e-partner
technical design
Control unit RIGEL 6
Motor voltage 230 V
Power consumption 250 W
Max. width of door/gate wing 2.2 m
Max. weight of door/gate wing 300 kg
Useful rod stroke 270 mm
Maximum angle 123 °
Cycle time 17 s
Type of limit switch work time
Slowdown no
Locking Solenoid Lock
Release Reversible
Impact reaction Hydraulic clutch
Frequency of use very intensive
Protection rating IP57
Environmental conditions -10 ÷ °C
Interconnectivity no
ALCOR AC A
D114092 00002

Control unit with on-board receiver - no display - Standard terminal block

ARB LUX
N733426

Adjustable front and rear bracket for LUX operator

ARB LUX G
N733474

Adjustable front and rear bracket for LUX G operator

ARB ORO - LUX
N733424 00001

Adjustable front mounting bracket for ORO and LUX

SFR B
N735002

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

SFR-L B
N735003

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

SFR B - COMPLETE
N735002 00001

Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

SFR-L B - COMPLETE
N735003 00001

Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

PLE
D730178

Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators

NAT
N999131

Adapter for 230V hydraulic operators for inserting the spiral cable protection sheath

ME
D111013

Control board for 12Vac solenoid lock for 230V automation systems

CLS
D610180

Triangular release key l=52 mm

RADIUS LED AC A R0
D114094 00002

Flashing light without incorporated antenna for motors with 230 V power supply.

RADIUS LED AC A R1
D114093 00002

Flashing light with incorporated antenna for motors with 230 V power supply.

Swinging gates
Hydraulic automation systems for swinging gates
Show

An unexpected error occurred: please reload the page or try again later.