MAXIMA ULTRA 36

Professional electromechanical barriers

catalog (PDF)

Professional electromechanical barriers

Professional electromechanical barrier with inverter technology and three-phase asynchronous motor for high frequency of use, developed and designed for a wide range of operating conditions such as large car parks or motorway toll booths with frequent inversions of movement. Can control access points from 2 to 6 metres wide with fully accessorised barrier. Oil bath gearbox unit. Mechanical crankshaft movement which can deliver fluidity of movement of the bar and control its soft opening and closing movements. Cap with RGB lights (optional) with traffic light function, available parking spaces and self-diagnostics. Easier access thanks to the dual entrance. With U-Link protocol for integration with Parking Management or Building Management systems in a single model.

Professional electromechanical barriers

Products list

  • News

Electromechanical barrier 120 V with automatic opening in the event of a power cut, without using an additional UPS unit. Used for controlling from 2.5 to 3 m entrances. Opening time from 0.8 to 1.2 s with deceleration. Suitable for installation in public spaces (e.g. hospitals, car parks, schools) and other sites subject to security regulations. Version with spring. Colour RAL 7015. U-Link embedded. Reversible oil bath gearbox unit and asynchronous three-phase motor with inverter. Cap with lights (optional). Anti-vandalism system mechanical crankshaft.

  • News

Electromechanical barrier 230 V with automatic opening in the event of a power cut, without using an additional UPS unit. Used for controlling from 2.5 to 3 m entrances. Opening time from 0.8 to 1.2 s with deceleration. Suitable for installation in public spaces (e.g. hospitals, car parks, schools) and other sites subject to security regulations. Version with spring. Colour RAL 7015. U-Link embedded. Reversible oil bath gearbox unit and asynchronous three-phase motor with inverter. Cap with lights (optional). Anti-vandalism system mechanical crankshaft.

  • News

Electromechanical barrier 120 V with automatic opening in the event of a power cut, without using an additional UPS unit. Used for controlling from 3 to 4 m entrances. Opening time from 0.8 to 1.2 s with deceleration. Suitable for installation in public spaces (e.g. hospitals, car parks, schools) and other sites subject to security regulations. Version with spring. Colour RAL 7015. U-Link embedded. Reversible oil bath gearbox unit and asynchronous three-phase motor with inverter. Cap with lights (optional). Anti-vandalism system mechanical crankshaft.

  • News

Electromechanical barrier 230 V with automatic opening in the event of a power cut, without using an additional UPS unit. Used for controlling from 3 to 4 m entrances. Opening time from 0.8 to 1.2 s with deceleration. Suitable for installation in public spaces (e.g. hospitals, car parks, schools) and other sites subject to security regulations. Version with spring. Colour RAL 7015. U-Link embedded. Reversible oil bath gearbox unit and asynchronous three-phase motor with inverter. Cap with lights (optional). Anti-vandalism system mechanical crankshaft.

    230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Colour RAL 7015.

      230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Stainless steel barrier body.

        230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Special RAL colour.

          230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Colour RAL 7015.

            230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Stainless steel barrier body.

              230 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Special RAL colour.

                120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Colour RAL 7015.

                  120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Stainless steel barrier body.

                    120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with spring. Special RAL colour.

                      120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Colour RAL 7015.

                        120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Stainless steel barrier body.

                          120 V electromechanical barrier with three-phase asynchronous motor and inverter, for controlling gates from 2 to 6 m wide. Opening time between 0.7 and 4 seconds, with slowdown. Maximum barrier length 6 m. Suitable for installation in areas with high frequency of movement and frequent inversion of barrier movement (e.g. motorway toll booths, car parks with high traffic flows, etc.). Version with strong spring. Special RAL colour.

                          Accessories

                          Crown MAXIMA U36
                          P940095 00000

                          Cap without lights for Maxima Ultra 36.

                          Crown RGB MAXIMA U36
                          P940095 00003

                          Cap with RGB lights for Maxima Ultra 36. Functions: flashing, traffic light, diagnostics.

                          Crown MAXIMA U36 INOX
                          P940095 00200

                          Cap without lights for Maxima Ultra 36 INOX.

                          Crown RGB MAXIMA U36 INOX
                          P940095 00203

                          Cap with RGB lights for Maxima Ultra 36 Stainless Steel. Functions: flashing, traffic light, diagnostics.

                          Crown RGB MAXIMA U36 RAL
                          P940095 00103

                          Cap with RGB lights for Maxima Ultra 36. Custom RAL. Functions: flashing, traffic light, diagnostics.

                          DIMA PRO36
                          P120088

                          Foundation template and clamps for installation of Maxima Ultra 36 barriers.

                          BOOM PS30
                          P120087 00001

                          Aluminium bar, opening L = 3 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

                          BOOM PS40
                          P120087 00002

                          Aluminium bar, opening L = 4 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

                          BOOM PS50
                          P120087 00003

                          Aluminium bar, opening L = 5 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

                          BOOM PS60
                          P120087 00004

                          Aluminium bar, opening L = 6 m with red reflectors. Includes rubber and upper optical diffuser. Lights excluded.

                          OMEGA PS MAXIMA U36
                          P120084 00000

                          Single lock for protective finger trapping casing and screws for MAXIMA ULTRA 36. BOOM PS bar excluded.

                          OMEGA FRA PS MAXIMA U36
                          P120094 00000

                          Resettable impact protection connector (manual) for Maxima Ultra 36 barrier. BOOM PS bar excluded.

                          NEW OMEGA FRA PS MAXIMA U36
                          P12094 00000

                          Resettable release system for PS barriers (max. 5 m)

                          LIGHT PS/ES 30-IP67
                          P120089 20001

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 3 metres long. Power supply unit excluded.

                          LIGHT PS 30
                          P120089 00001

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 3 metres long. Power supply unit excluded.

                          LIGHT PS/ES 40-IP67
                          P120089 20002

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 4 metres long. Power supply unit excluded.

                          LIGHT PS 40
                          P120089 00002

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 4 metres long. Power supply unit excluded.

                          LIGHT PS/ES 50-IP67
                          P120089 20003

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 5 metres long. Power supply unit excluded.

                          LIGHT PS 50
                          P120089 00003

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 5 metres long. Power supply unit excluded.

                          LIGHT PS/ES 60-IP67
                          P120089 20004

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS/ES bar up to 6 metres long. Power supply unit excluded.

                          LIGHT PS 60
                          P120089 00004

                          High intensity LED lighting kit, red-green, to be fitted on BOOM PS bar up to 6 metres long. Power supply unit excluded.

                          ALLU 2 MAXIMA ULTRA
                          P120075

                          Power supply for ATM LIGHT Kit on Maxima Ultra

                          HYPHEN PS
                          P120091

                          Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m with or without accessories.

                          Internal reinforcement/joint for BOOM PS booms. Already included in the Maxima Ultra 36 XL barriers but recommended for barriers L >= 5 m...

                          HYPHEN PS PRO
                          P120108

                          Internal reinforcement for BOOM PS booms L=175 cm. Increases the rigidity of the bar. Recommended for use in particularly windy areas.

                          BTM-SKIRT
                          P120085

                          Lower skirt for BOOM PS booms. Module length L = 2 m.

                          FULL-SKIRT
                          P120086

                          Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module to the barrier body.

                          Full skirt (top and bottom) for BOOM PS booms. Module length L = 2 m. Does not include SKIRT BRACKET required for anchoring the first module...

                          BRACKET SKIRT
                          P120095

                          Connection bracket between barrier body and simple (BTM SKIRT) or double (FULL SKIRT) aluminium rack.

                          ADJ-FOOT
                          P120093

                          Suspended cushioned telescopic supporting foot for BOOM PS booms.

                          KIT ART90 PS
                          P120092

                          Kit for 90° articulated bar. Excludes bar, bar connector, LIGHT PS lighting. Compatible with BOOM PS booms.

                          ART90 BOOM PS30
                          P120092 00001

                          Boom bar PS 90° articulated L = 5 m pre-fitted. Excludes LIGHT PS lighting.

                          ART90 BOOM PS30 R/G
                          P120092 00002

                          Boom bar PS L = 5 m 90° articulated including bar and LIGHT PS lighting pre-fitted.

                          ART90 BOOM PS50
                          P120092 00003

                          Boom bar PS 90° articulated L = 5 m pre-fitted. Excludes LIGHT PS lighting.

                          ART90 BOOM PS50 R/G
                          P120092 00004

                          Boom bar PS L = 5 m 90° articulated including bar and LIGHT PS lighting pre-fitted.

                          FAF UNI R
                          P120080

                          Universal adjustable fork for all rods; recommended with installation of FULL SKIRT accessory.

                          EBB KIT ATML
                          P120079

                          Electric lock for ATML rods to be installed on an FAF UNI R adjustable fork.

                          PS JOINT
                          P120113

                          Joint for BOOM PS booms.

                          SPIRA 2X1
                          D110926 00001

                          Magnetic loop 2 x 1 m

                          RME 2
                          P111001 00003

                          230 V dual channel metal object detector with installation base

                          LASER DETECTOR REMOTE CONTROL
                          394075

                          Remote control for settings Safety laser detector and Presence and Safety laser detector.

                          LOOP DETECTOR PRO 230V
                          P111786

                          Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level, boost function for increasing sensitivity, direction of travel management

                          Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

                          LASER SAFATEY DETECTOR
                          394073

                          Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes two relay outputs. Maximum detection range: 5m x 5m.10-35VDC power supply.

                          Safety laser detector. Its used in combination with magnetc loops in order to add an additional safety device (eg: for pedestrian). Includes...

                          RME 1 BT
                          P111274

                          24 V single channel metal object detector with installation base

                          PRESENCE AND SAFETY DETECTOR - LASER LOOPS
                          394080

                          Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection range: 9.9m x 9.9m.10-35VDC power supply.

                          Presence and Safety laser detector. Its used as an alternative of magnetc loops. Includes one input and two relay outputs. Maximum detection...

                          PALO ø60 H3600
                          394160

                          Galvanized steel pole support for panels and traffic lights. Diam. 60mm - h 3600mm

                          TCP/IP
                          392580

                          -

                          SRV DIN
                          P120032

                          Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply terminals, socket for metal mass detector and standard input/output terminal block

                          Standard DIN rail for interfacing barrier with parking system, configured and prewired with thermal magnetic switch, additional supply...

                          RS485
                          392585

                          Serial module interface RS485. Only compatible with NIGHT&DAY Xtreme barriers, and CDS-K control unit for bollards.

                          An unexpected error occurred: please reload the page or try again later.