To access your reserved area you must fill out the registration form by following a simple wizard.
After clicking the button below, please enter your details and send the request.
ATTENTION: This operation applies only for the country from where you are registering. To access the Reserved Area from a different country you must do a new registration.
Electromechanical operator for residential use for the automation of overhead garage doors. The built-in control unit manages the second operator for installation on large-size doors or doors with integrated pedestrian doors. The microprocessor technology also manages the torque of the motors with maximum precision and in total safety.
Release knob protected by a safety door; can also be operated from outside by means of a steel cable.
Quickly and easily adjustable limit switched on board motor.
Control unit incorporated with torque self-learning system, programming display and on-board radio receiver.
Electromechanical operator with built-in control panel for overhead garage doors of maximum surface area 7 m² and Semi intensive use with slowdown. Cycle time 17-20 s, IP20
Operator with incorporated panel for articulated leaf up&over garage doors of maximum surface area 7 m² and duty Semi intensive with slowdown. Manoeuvre time 17-20 s, IP20
Operator for overhead garage doors of maximum surface area 7 m² and Semi intensive use. Cycle time 17-20 s, IP20
Electromechanical operator with built-in control panel for overhead garage doors of maximum surface area 7 m² and Semi intensive use with slowdown. Cycle time 17-20 s, IP44
Recommended accessories.
HYDRA N control board in CPEL panel Application: control panel for one or two overhead garage door operators Card power supply: 230 V single-phase Operators power supply: 24Vdc 168W max each operator Main characteristics: removable terminal blocks, programming with display and incorporated dual channel receiver, anti-crushing, slowdown during opening and closing and electronic self-learning Main functions: automatic re-closing, fast closing, pulse blocking, blocking hold Compatibility: HYDRA, HYDRA R Versione per quadro esterno non compatibile con scheda a bordo motore
HYDRA N control board in CPEL panel Application: control panel for one or two overhead garage door operators Card power supply: 230 V...
Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT
Short welding base for PHEBE series operators (L 578 mm)
Long welding base for PHEBE series operators (L 1600 mm)
2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators
2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators
Straight telescopic arms for the installation of PHEBE series operators on overhead door
Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm
Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm
Curved telescopic arms for the installation of PHEBE series operators on overhead door
External manual release for overhead garage door (1 operator)
External manual release for overhead garage door (2 operators)
Set of backup batteries for LIBRA C MA, LIBRA C LX, HYDRA N, ARGO, VENERE BT A DIS
Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor
