KUSTOS ULTRA BT A

Motors and kit for swing gates, with covered worm screw and U-link technology

catalog (PDF)

Motors and kit for swing gates, with covered worm screw and U-link technology

Complete range of electromechanical pistons for residential use, suitable for swing gate leaves up to 4 metres wide and weighing up to 500 kg. Quick and practical installation: the new KUSTOS BT A operators are designed to allow quick and easy installation, thanks to a number of important measures such as the covered worm screw, integrated stops, magnetic limit switches and the magnetic locking pin.

Motors and kit for swing gates, with covered worm screw and U-link technology

Main features

Covered worm screw: all KUSTOS BT A range operators are telescopic operators with completely covered worm screw. This ensures maximum protection against external agents (water, dust, dirt, etc.) as well as a total protection for people, preventing any type of access to the moving parts.

Magnetic limit switch and integrated stops: the magnetic limit switch system ensures maximum precision of movement and quick and easy adjustment. Coupled with integrated adjustable mechanical stops, they allow precise installation without requiring floor stops.

Technologies

24V

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

Dynamic Path Tracking

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

Rolling Code

For safe transmission. BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation. When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once. The algorithm generated then prevents the reproduction of the code.

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Products list

    Irreversible electro-mechanical operator 24 V for swing gates up to 400 kg in weight and up to 2.5 m in length with covered worm screw. Integrated mechanical stops.

      Irreversible electro-mechanical operator 24 V for swing gates up to 500 kg in weight and up to 4 m in length with covered worm screw. Integrated mechanical stops.

      Kit

        Complete kit 24 V for swing gates up to 400 kg in weight and up to 2.5 m in length. Operators with covered worm screw (IP44). Integrated mechanical stops.

          Complete kit 24 V for swing gates up to 500 kg in weight and up to 4 m in length. Operators with covered worm screw (IP44). Integrated mechanical stops.

          Accessories

          THALIA P
          D113747 00002

          Card power supply: 230 V single-phase Operators power supply: 24Vdc 240W max each operator Main features: removable terminal blocks with new standard colour-coding, simplified scenario-based programming with display and incorporated dual channel receiver, D-Track anti-crushing system , slowdown during opening and closing and electronic self-learning Main features: automatic closing, rapid closing, partial opening, operation with deadman feature, direct connection powered solenoid lock and electromagnet, direct connection edge 8K2. Application: display panel for 1 or 2 24V operators Compatibility: LIBRA, LIBRA R, LIBRA MA R

          Card power supply: 230 V single-phase Operators power supply: 24Vdc 240W max each operator Main features: removable terminal blocks with new...

          ARB KUSTOS FRONT
          N733646

          Front adjustable fixing brackets for Kustos BT A

          PLE
          D730178

          Anchor plate for attaching the rear mountings to masonry pillars for LUX, ORO, and PHOBOS operators.

          SFR B
          N735002

          Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7)

          SFR-L B
          N735003

          Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7)

          SFR B - COMPLETE
          N735002 00001

          Adjustable wall bracket, short, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

          SFR-L B - COMPLETE
          N735003 00001

          Adjustable wall bracket, long, for linear swing-gate motors (excluding P4.5-P7), with flat bracket

          CABLE N BT
          N999404

          Control unit connecting cable for PHOBOS BT A, KUSTOS BT A. Coil of 100 m, 3x1,5.

          BBT BAT
          P125020

          Set of backup batteries for THALIA, THALIA P, ZARA and PHEBE

          RADIUS LED BT A R1
          D114093 00003

          Flashing light with incorporated antenna for motors with 24 V power supply.

          RADIUS LED BT A R1 W
          D114168 00003

          Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

          COMPACTA A20-180
          P111782

          Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

          EBP BT A 24V
          P123032 00003

          24V vertical electric lock.

          MITTO B RCB02 R1
          D111904

          Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

          An unexpected error occurred: please reload the page or try again later.