ARES ULTRA BT A

Kit and motors for the automation of sliding gates up to 1500 kg

catalog (PDF)

Kit and motors for the automation of sliding gates up to 1500 kg

24 V sliding gates operator for intensive use,up to 1500 Kg in weight. Leaf speed up to 9 m/min. Magnetic limit switch and control board with U-link protocol embedded

Kit and motors for the automation of sliding gates up to 1500 kg

Main features

Magnetic limit switches: this type of limit switch ensures safe and precise installations in any ambient condition

Control unit with programming display: the Merak control unit with programming display with pre-programmed scenarios helps the installer in the programming phase; the control unit is arranged in an oblique way, to facilitate reading and making the settings.

Front screws: this arrangement of the casing screws offers ease and convenience during installation and maintenance, even when there is limited space.

Release lever with personalised key: the release lever simplifies motor release and the personalized key ensures its uniqueness, for better safety

Technologies

U-Link

A single communication platform for all types of control units and receivers. The innovative interconnectivity systems developed by Bft along with wireless connection solutions in the field of access point automation become integrated through the new U-link system communication protocol. A technology designed and developed to operate using specific gateways for any type of physical media and communication protocol. To fully facilitate installers in creating the system and in maintenance, Bft can offer solutions based on Bluetooth transmission systems in local and TCP/IP environments for remote connection. U-Link ensures an absolutely stable standard, correct communication, as well as secure data protection thanks to two levels of encryption, offered by the data encryption system and password of the protocol and by the underlying communication system. - U-Link is a technological platform that forms the heart of Bft products - U-link uses an open approach: by changing the B-Eba, Bft proprietary gateway, it is possible to adapt to many different communication languages - U-link is flexible: it can work with or without a network connection, depending on the B-Eba gateway installed - U-Link enables remote maintenance of the products thanks to two-way communication - U-link is scalable: an infinite number of objects can be added to a U-link network - U-Link allows the creation of groups of products: various B-Ebas can be grouped to allow individual or group control of the associated products U-link is an innovation that turns products into Bft solutions.

24V

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

Dynamic Path Tracking

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

Products list

    Operator 24 V for sliding gates up to 1000 kg in weight. Leaf speed 9 m/min.

      Operator 120 V for sliding gates up to 1000 kg in weight. Leaf speed 9 m/min.

        Operator 120 V for sliding gates up to 500 kg in weight. Leaf speed 12 m/min.

          Operator 24 V for sliding gates up to 1500 kg in weight. Leaf speed 9 m/min.

            Operator 120 V for sliding gates up to 1500 kg in weight. Leaf speed 9 m/min.

              Operator 120 V for sliding gates up to 750 kg in weight. Leaf speed 12 m/min.

              Kit

              • News

              Complete kit 24 V for sliding gates weighing up to 1500 kg. Leaf speed 9 m/min.

                Complete kit 24 V for sliding gates weighing up to 1000 kg. Leaf speed 9 m/min.

                Accessories

                CP
                D221073

                plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots attachment Max. load capacity 600 kg.

                CVZ-S
                N999320

                steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 800 kg.

                CVZ
                D571053

                steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw-fitted on supports attachment Max. load capacity 1000 kg.

                CFZ
                D571054

                galvanized steel rack, 4-module, cross-section 22 x 22 mm, length 2 m, welding attachment Max. load capacity 2000 kg.

                RADIUS LED BT A R1
                D114093 00003

                Flashing light with incorporated antenna for motors with 24 V power supply.

                RADIUS LED BT A R1 W
                D114168 00003

                Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

                RADIUS LED BT A R0
                D114094 00003

                Flashing light without incorporated antenna for motors with 24 V power supply.

                COMPACTA A20-180
                P111782

                Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

                MITTO B RCB02 R1
                D111904

                Transmitter with 2 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A

                B EBA RS 485 LINK
                P111468

                Expansion board for connection of central units with serial controls management

                SL BAT2
                P125035

                Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

                THEKE B PRA 01
                P125018

                Metal protection box for ARES and ICARO series sliding operators

                SFI
                N999156

                Base plate for ARES and ICARO (supplied with operator)

                An unexpected error occurred: please reload the page or try again later.