PILLAR B 275/800.10C

Hydraulic retractable bollard with security system for power outages

High strength automatic hydraulic bollard with built-in hydraulic control unit, tested and certified by an independent organisation in accordance with PAS68:2010 with 7500/50/N2 rating that includes ASTM F2656:2007 M30 (dynamic simulation). SD version which keeps the bollard raised in the event of a loss of power (protection of sensitive sites). Standard version where the bollard instantly drops in the event of a loss of power.

Technologies

Easily accessed hydraulic pump

This solution, included in the range of Bft hydraulic bollards, allows quick maintenance without the use of a shaft lifting crane.

Products list

PILLAR B 275/800.10C L

230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. In the event of a power cut, the bollard lowers automatically. Painted stainless steel version, RAL 7015. Foundation box included.

PILLAR B 275/800.10C L - RAL

230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. In the event of a power cut, the bollard lowers automatically. Painted steel version. RAL colour to order. Foundation box included

PILLAR B 275/800.10C LI STAINLESS STEEL 316

230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. In the event of a power cut, the bollard lowers automatically. Foundation box included.

PILLAR B 275/800.10C L SD

Hydraulic bollard 230 V, shaft height 800 mm and diameter 273 mm. LED light cap and H adhesive strip: 100 mm approved. The shaft stays raised in case of a power failure. RAL 7015 painted steel version.

PILLAR B 275/800.10C L SD - RAL

230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. LED light cap and H adhesive strip: 100 mm, approved. The shaft remains in the raised position in case of a power failure. Painted steel version, RAL colour to order. Foundation box included.

PILLAR B 275/800.10C LI SD STAINLESS STEEL 316

230 V hydraulic bollard, shaft height 800 mm and diameter 273 mm. LED light cap and adhesive H strip: 100 mm, approved. In the event of a power cut, the bollard remains raised. 304 stainless steel version. Foundation box included.

Accessories

PILLAR ALARM
P800102

Magnetic anti-theft kit for PILLAR B hydraulic bollards. To be requested when ordering

RME 2
P111001 00003

230 V dual channel metal object detector with installation base

SPC3
D121619

Open stop close button panel.

SPIRA 2X1
D110926 00001

Magnetic loop 2 x 1 m

MANUAL PUMP 2LT
P800111

2 litre manual pump

BOLLARD CABLE EXT25
P800114

Extra charge for 25 m cable for bollards (to be added to the 10 included into bollards)

TAP FOR MANUAL PUMP
P800112

Joint for two-litre manual pump.

BOLLARD CABLE EXT50
P800115

Extra charge for 50 m cable for bollards (to be added to the 10 included into bollards)

LOOP DETECTOR PRO 230V
P111786

Metal object detector, 2 channels, 230VAC, up to 4 frequencies per channel for installation of adjacent coils, adjustable sensitivity level,...

View fewer accessories

Automation Systems for Residential Use

Automation Systems for Commercial Use

Automation Systems for Urban Use

PILLAR B 275/800.10C

Technologies