SUB BT

Low voltage hydraulic motor for swing gates

catalog (PDF)

Low voltage hydraulic motor for swing gates

Low voltage hydraulic operator for very intensive use, suitable for any type of residential, industrial or multi-residence application. Compact and sturdy, they can automate swing gate leaves up to 2.5m wide and weighing up to 800kg. Fitted with mechanical stops and virtual encoder, guaranteeing maximum anti-crushing safety thanks to the electronic slowdown and D-Track system

Low voltage hydraulic motor for swing gates

Main features

Control unit with programming display and new, simplified scenario-based programming

Fully adjustable mechanical stops inside the operator

The monoblock structure gives the possibility of a very neat installation that is extremely reliable over time.

Technologies

Dynamic Path Tracking

The thrust required to operate safely. A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations. BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor. A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles. The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

24V

A precise, safe and reliable technology Bft 24V technology ensures optimum performance with a precise adjustment of slowdown in closing and opening. Safety is another key aspect, ensuring the immediate stopping and reversal of movement in the presence of obstacles. The efficiency of the technology is a guarantee of the product's reliability.

EE LINK

For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.

ER - READY

The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.

Products list

    Low voltage, in-ground irreversible hydraulic operator for hinged leaves up to 2,5 m. weight 800 kg.

    Accessories

    THALIA
    D113745 00002

    Application: control panel with display for one or two 24V electromechanical operators for swing gates Card power supply: 230 V single-phase Operators power supply: 24Vdc 180W max each operator Main features: new standard colour removable terminal blocks, simplified scenario-based programming with display and integrated dual-channel receiver, D-Track anti-crushing system, slowdown during opening and closing and electronic self-learning. Main functions: automatic re-closing, fast closing, partial opening, deadman feature Compatibility: LIBRA, LIBRA R, LIBRA MA R

    Application: control panel with display for one or two 24V electromechanical operators for swing gates Card power supply: 230 V single-phase...

    COMPACTA A20-180
    P111782

    Pair of photocells adjustable 180° horizontally. 20 metre range. 12-33 VAC/15-35 VDC power supply.

    RADIUS LED BT A R0
    D114094 00003

    Flashing light without incorporated antenna for motors with 24 V power supply.

    RADIUS LED BT A R1
    D114093 00003

    Flashing light with incorporated antenna for motors with 24 V power supply.

    RADIUS LED BT A R1 W
    D114168 00003

    Flashing light with incorporated antenna for motors with 24 V power supply. White flashing light.

    EBP BT A 24V
    P123032 00003

    24V vertical electric lock.

    FCS BT
    N733480 00001

    Foundation box for SUB BT series operators

    SCC
    N733392

    Release for ELI AC A, ELI BT A and SUB BT with lever key.

    SCP
    N733502

    Release for ELI AC A, ELI BT A and SUB BT with personalized key.

    BBT BAT
    P125020

    Set of backup batteries for THALIA, THALIA P, ZARA and PHEBE

    An unexpected error occurred: please reload the page or try again later.