Underground electromechanical operator 230 V for swing gates up to 300 kg in weight and 3.5 m in length.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.Report a suspicious product or e-partner
The new coding system for direct cloning of remote controls Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control. In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used. Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming. EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa. Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated. Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc. With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
|Control unit||RIGEL 6, ALENA SW2|
|Motor voltage||230 V|
|Power consumption||300 W|
|Max. width of door/gate wing||3.5 m|
|Max. weight of door/gate wing||300 kg|
|Maximum angle||120 °|
|Cycle time||28 s|
|Type of limit switch||work time|
|Release||Lever or lever with personalised key|
|Impact reaction||Electronic clutch|
|Frequency of use||Semi intensive|
|Environmental conditions||-20 ÷ 50 °C|
Cod. D113703 00002
Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for one or two operators for swing gates Card power supply: 230 V single-phase Operator power supply: 230 V single-phase, max. 300W per operator Main features: removable terminal blocks, programming with display and built-in dual channel receiver Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics Compatibility: ALTAIR and ARIES
Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors Application: control panel for...
BTCF 120 E
Foundation box with levers for ELI AC A, ELI BT A. Release not supplied
BTCF 120 E INOX
Stainless steel foundation box with levers for ELI AC A, ELI BT A. Release not provided
Release for ELI AC A, ELI BT A and SUB BT with lever key.
Release for ELI AC A, ELI BT A and SUB BT with personalized key.
Accessory for opening to 180 ° for ELI AC A40, ELI BT A40 operator