PHEBE N SQ
Product code P915135 00102Operator for overhead garage doors of maximum surface area 7 m² and Semi intensive use. Cycle time 17-20 s, IP20.
PLUS
Release knob protected by a safety door; can also be operated from outside by means of a steel cable.
Quickly and easily adjustable limit switched on board motor.
Control unit incorporated with torque self-learning system, programming display and on-board radio receiver.
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
| Control unit | HYDRA N |
| Nominal voltage | 24 V |
| Power input | 40 W |
| Cycle time | 17-20 s |
| Door surface area | 7 m² |
| Type of limit switch | Electromechanical |
| Slowdown | Yes |
| Locking | Mechanical |
| Release | knob |
| Impact reaction | Electronic torque limiter |
| Frequency of use | Semi intensive |
| Protection rating | IP20 |
| Environmental conditions | -15 ÷ 60 °C |
| U-Link | no |
VEGA QUADRO QSG
HYDRA N CPEL Cod. D113730 00002HYDRA N control board in CPEL panel.
Application: control panel for one or two overhead garage door operators.
Board power supply: 230V...
HYDRA N control board in CPEL panel.
Application: control panel for one or two overhead garage door operators.
Board power supply: 230V single-phase.
Operators power supply: 24Vdc 168W max each operator.
Main characteristics: removable terminal blocks, programming with display and incorporated dual channel receiver, anti-crushing, slowdown during opening and closing and electronic self-learning.
Main functions: automatic re-closing, fast closing, pulse blocking, blocking hold.
Compatibility: HYDRA, HYDRA R.
Versione per quadro esterno non compatibile con scheda a bordo motore.
CTBP Cod. N733299Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT.Pack of 1800 mm drive tubes and fixing bases for completing the PHEBE N KIT.
BCP Cod. D412377Short welding base for PHEBE series operators (L 578 mm).Short welding base for PHEBE series operators (L 578 mm).
BLP Cod. N733288Long welding base for PHEBE series operators (L 1600 mm).Long welding base for PHEBE series operators (L 1600 mm).
CTA Cod. N7331202 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators.2 square drive tubes of cross section 20x20 mm and length 1800 mm for PHEBE N series operators.
CTA2 Cod. N7331292 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators.2 square drive tubes of cross section 20x20 mm and length 200 mm for PHEBE N series operators.
CBA Cod. N733112Straight telescopic arms for the installation of PHEBE series operators on overhead door.Straight telescopic arms for the installation of PHEBE series operators on overhead door.
CBAS Cod. N733119Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm.Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1000 mm.
CBASL Cod. N733113Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm.Straight telescopic arms for the installation of PHEBE series operators on overhead door of length 1500 mm.
CBAC Cod. N733114Curved telescopic arms for the installation of PHEBE series operators on overhead door.Curved telescopic arms for the installation of PHEBE series operators on overhead door.
CBAC-G Cod. N733221Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors.Curved telescopic arms for installation of PHEBE BT A series operators on up-and-over doors.
SM1 Cod. P115005External manual release for overhead garage door (1 operator).External manual release for overhead garage door (1 operator).
SM2 Cod. P115001External manual release for overhead garage door (2 operators).External manual release for overhead garage door (2 operators).
BT BAT1 Cod. P125007Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor.Emergency battery kit for HYDRA N CPEL, only for external board not compatible with board on motor.
