Motors for sliding gates up to 600 kg with magnetic limit switch and U-link integration

DEIMOS ULTRA BT A400

Product code P925221 00002
  • DIMENSIONAL DIAGRAM
technical design DEIMOS ULTRA BT A
Technologies
  • The thrust required to operate safely.
    A smart torque management system based on the microprocessor technology of BFT control units.
    Acquiring data from several indicators, it updates the level of thrust required to perform the operation.
    D-Track also facilitates the installer in providing for the certifications required by law.
    Conventional control units do not "read" the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.
    BFT control devices record the slightest variation in the gate or door force, for example due to differences in temperature or wear, constantly supplying the optimum torque to the motor.
    A conventional control unit could not detect these thrust variations, which would result in it indicating the presence of non-existent obstacles.
    The BFT system thus guarantees the maximum safety and perfect functioning of the equipment, no matter what the climactic and temperature conditions and degree of mechanical wear.

Operator 24 V for sliding gates up to 400 kg in weight. Leaf speed 12 m/min.

PLUS
  • Magnetic limit switches: this type of limit switch ensures safe and precise installations in any ambient condition

  • Control unit with programming display: the Merak control unit with programming display with pre-programmed scenarios helps the installer in the programming phase; the control unit is arranged in an oblique way, to facilitate reading and making the settings.

  • Front screws: this arrangement of the casing screws offers ease and convenience during installation and maintenance, even when there is limited space.

  • Release lever with personalised key: the release lever simplifies motor release and the personalized key ensures its uniqueness, for better safety

Built-in control panel
MERAK
Assistance

Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.

Technical documentation
Technical Data
Type of limit switch Magnetic
Impact reaction D-track
Slowdown Yes
U-Link Yes
Control unit Merak sl1
Board power supply 230 v
Power input 50 w
Locking Mechanical
Release Lever-operated with personal key
Frequency of use Intensive
Protection rating Ip44
Environmental conditions -20 ÷ 55 °c
Max. door/gate weight 400 kg
Supply voltage AC 24 v
Pinion module 4
Gate speed 12 m/min
Accessories

Recommended accessories.

  • CP Cod. D221073 plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.
    plastic rack, 4-module, cross-section 22 x 22 mm, length 1 m, screw-fitted into slots.
    Max. load capacity 600 kg.

  • CVZ Cod. D571053 steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
    Max. load capacity 1000 kg.
    steel rack, 4-module, cross-section 30 x 12 mm, length 1 m, screw on supports.
    Max. load capacity 1000 kg.

  • SL BAT2 Cod. P125035 Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A. Emergency battery kit for Deimos BT A, Ares BT A, Deimos Ultra BT A, Ares Ultra BT A.

  • CVZ-S Cod. N999320 steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.
    steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports.
    Max. load capacity 800 kg.

  • B EBA RS 485 LINK Cod. P111468 Expansion board for connection of central units with serial controls management. Expansion board for connection of central units with serial controls management.

  • SFD Cod. N999151 Base plate for DEIMOS series (supplied with operator). Base plate for DEIMOS series (supplied with operator).

View all the accessories

This website uses profiling cookies (own and of other websites) for the purpose of sending advertising messages in line with the preferences expressed by the user in the context of web browsing. By continuing to browse or by accessing any element of the website without changing the cookie settings, you implicitly accept to receive cookies on our website. The settings of the cookies can be changed at any time by clicking on Information or using the Privacy link located at the bottom of the page.

Continue
Information

An unexpected error occurred: please reload the page or try again later.