PHOBOS AC KIT A25 FRA
Product code R935304 00003Complete kit 230 V for swing gates up to 400 kg in weight and 2.5 m in length.
PLUS
Magnetic pin: an exclusive feature of Bft operators enabling quicker installation steps, making them easier and always ensuring correct rear locking of the operator
Attention: To benefit from the official warranty on Bft products purchased online, you must check that the retailer is approved by Bft.
Report a suspicious product or e-partner
For safe transmission.
BFT transmitters use a rolling code system that manages the commands in a completely secure way and prevents any type of external violation.
When a transmitter key is pressed the command is sent to the control unit with a different code each time, identifiable only by the receiver and accepted only once.
The algorithm generated then prevents the reproduction of the code.
The new coding system for direct cloning of remote controls.
Based on microprocessor technology, this system allows the cloning of any MITTO remote control in a MITTO REPLAY remote control.
In fact, the first remote control "teaches" the second one the correct code which is automatically saved in the receiver the first time it is used.
Everything occurs at the highest levels of security thanks to the use of the Rolling Code safe transmission system.
For fast and safe programming.
EELINK is a system developed by BFT which, by means of connection to handheld programmers (Unipro, Uniradio and Proxima), makes it possible to transfer data from automatic systems to PCs and vice versa.
Thus EEdbase or U-base, the databases of the information stored in the installed systems, are constantly updated.
Thanks to this software it possible to associate the necessary personal details with each system: owner's address and details, name of maintenance technician, names of every remote control holder, etc.
With EElink, just press a few buttons to easily manage the customer base or preventive maintenance. Even operations that were once complex become easier: for example, reconfiguring the control unit or the radio receiver in case of replacement or the setup of a control panel, starting from a standard or custom configuration.
| Control unit | RIGEL 6, ALENA SW2 |
| Board power supply | 230 V |
| Motor voltage | 230 V |
| Power input | 210 W |
| Max. width of door/gate wing | 2.5 m |
| Max. weight of door/gate wing | 400 kg |
| Useful rod stroke | 350 mm |
| Maximum angle | 120 ° |
| Cycle time | 14 s |
| Type of limit switch | work time |
| Slowdown | no |
| Locking | Mechanical |
| Release | Personal key |
| Impact reaction | Electronic clutch |
| Frequency of use | Semi intensive |
| Protection rating | IPX4 |
| Environmental conditions | -20 ÷ 55 °C |
| U-Link | no |
ALENA ACL2
RIGEL 5
RADIUS B LTA 230 R1
Flashing light with incorporated antenna for motors with power supply 230 V.
DESME A15
Pair of self-aligning photocells. Range 30 m. Power supply 24 V ac/dc.
MITTO B RCB04 R1
Transmitter with 4 channels. Range 50/100 m. Power supply 12 V with 1 battery type 23 A.
PHOBOS AC A25
Irreversible electromechanical operator 230 V for swing gates weighing up to 400 kg and 2.5 m long.
Open
ALTAIR P Cod. D113703 00002Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors.
Application: control panel for...
Control panel with display for one or two 230V/300W operators for swing gates and industrial folding doors.
Application: control panel for one or two operators for swing gates.
Board power supply: 230V single-phase.
Operators power supply: 230V single-phase 300W max each operator.
Main features: removable terminal blocks, programming with display and built-in dual channel receiver.
Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics.
Compatibility: ALTAIR and ARIES.
ARB PHOBOS N Cod. N733427Front and rear adjustable bracket for PHOBOS operator.Front and rear adjustable bracket for PHOBOS operator.
ARB PHOBOS N L Cod. N733428Front and rear adjustable bracket for PHOBOS operator.Front and rear adjustable bracket for PHOBOS operator.
SFR A Cod. N733722Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.
SFR L A Cod. N733723Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.Adjustable bracket for PHOBOS BT A, PHOBOS AC A, KUSTOS BT A.
PLE Cod. D730178Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.Anchor plate for welding the mountings to masonry pillars for LUX, ORO, PHOBOS operators.
CABLE N Cod. N999405Control unit connecting cable for PHOBOS AC A. Coil of 100 m, 4x0,75.Control unit connecting cable for PHOBOS AC A. Coil of 100 m, 4x0,75.
ALENA SW2 Cod. D113811 00004Application: control panel for one or two operators for swing gates.
Board power supply: 230V single-phase.
Operators power supply: 230V...
Application: control panel for one or two operators for swing gates.
Board power supply: 230V single-phase.
Operators power supply: 230V single-phase 400W max each operator.
Main features: programming of trimmer and dip-switch, removable terminal block with standard colouring, integrated radio receiver, remote controlled pedestrian opening. Soft opening and closing (only with electromechanical motor), management of resistive safety edges 8K2/contact, management of verified safety devices, management of electronic locks, electronic control of motor torque (only with electromechanical motor), pressure surge when opening.
Main functions: stays locked when closed, 3/4 step logic, partial opening, fast closing and self-diagnostics.
Compatibility: ALTAIR and ARIES.
